School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China; Ministry of Education Key Laboratory of Advanced Textile Composite Materials, Tiangong University, Tianjin 300387, China
Auto-generated profile, based on publicly available information
Jie Fan
School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China; Ministry of Education Key Laboratory of Advanced Textile Composite Materials, Tiangong University, Tianjin 300387, China
The rapid development of communication technology and high-frequency electronic devices has created a need for more advanced electromagnetic interference (EMI) shielding materials. In response to this demand, a study has been conducted to develop multifunctional carbon nanofibers (CNFs)/polyaniline (PANI) aerogels with excellent electromagnetic interference shielding, flame retardancy, and thermal insulation performance. The process involved freeze-drying of electrospun CNFs and PANI nanoparticles followed by in situ growth PANI to coat the CNFs, creating the core–shell structured CNFs/PANI composite fiber and its hybrid aerogels (CP-3@PANI). The interaction between PANI and aniline (ANI) provides attachment sites, allowing additional ANI adsorption into the aerogel for in situ polymerization. This results in PANI uniformly covering the surface of the CNFs, creating a core–shell composite fiber with a flexible CNF core and PANI shell. This process enhances the utilization rate of the ANI monomer and increases the PANI content loaded onto the aerogel. Additionally, effective connections are established between the CNFs, forming a stable, conductive three-dimensional network structure. The prepared CP-3@PANI aerogels exhibit excellent EMI shielding efficiency (SE) of 85.4 dB and specific EMI SE (SE d−1) of 791.2 dB cm3 g⁻1 in the X-band. Due to the synergistic flame-retardant effect of CNFs, PANI, and the dopant (phytic acid), the CP-3@PANI aerogels demonstrate outstanding flame-retardant and thermal insulation properties, with a peak heat release rate (PHRR) as low as 7.8 W g⁻1 and a total heat release of only 0.58 kJ g⁻1. This study provides an effective strategy for preparing multifunctional integrated EMI shielding materials.
8 December 2020 in Journal of Materials Chemistry A
Solar steam generation as a promising technology has great potential for application in wastewater treatment and seawater desalination. However, it remains challenging to develop low-cost, high-efficiency steam generators that are suitable for large scale application. Here, inspired by the natural transpiration process of trees, we fabricated a three-dimensional (3D) hierarchical tree-shaped biomimetic flax fabric (TBFF) using an ordinary loom, consisting of a float layer, basket weave layer and plain weave layer, which showed directional water transport properties along the continuous warp yarns of the fabric. Then, the obtained TBFF was modified by one-step synthesis of large-area polydopamine–polypyrrole composite (PDA–PPy) nanofibers for a high hydrophilicity and a higher surface area. The hierarchical micro-capillary pores of yarns and macro-interlaced pore structures between the warp and weft yarns in such modified TBFF-PDA-PPy exhibit broadband light absorption, high-efficiency water supply, large evaporation area, and easy steam escape. Therefore, the continuous water transport paths formed by TBFF-PDA-PPy could deliver an attractive evaporation rate of 1.37 kg m−2 h−1, where the solar energy conversion efficiency was up to 87.4% under 1 sun illumination. Based on the facile fabrication, low cost and scalable manufacturing process, this nature-inspired design of 3D hierarchical TBFF-PDA-PPy is expected to promote large-scale applications in water purification and seawater desalination.
Multiple jets ejection in electrospinning has been a major approach to achieving a high production rate of ultrafine fibers, also known as nanofibers. This work studies the effect of solution parameters—including dielectric constant, polarity, conductivity and surface tension—on the jet number and jet evolution in the auxiliary electrode electrospinning approach. The results show that it is easier to generate 2–6 jets with short stable jet length (1.7–6.9 mm) under low voltage (5.03–7.13 kV) when solutions have higher dielectric constant (32.2–78.6) and larger surface tension (31.8–41.29 mN/m). The influence of solution properties on stable jet length and the influence of applied voltage to produce multiple jets are discussed in detail. This work provides a new perspective for understanding jet evolution and mass production of nanofibers in electrospinning.
24 June 2019 in Journal of Low Frequency Noise, Vibration and Active Control
The capillary effect has wide applications from biology and textile engineering to nanotechnology especially the micro-electromechanical systems and microfluidics device. The capillary vibration significantly affects its mass transmission. This paper establishes a nonlinear oscillator of a deforming capillary tube. The geometric potential theory is used to estimate the capillary force. The paper reveals that the low-frequency property of capillary vibration plays an important role not only in life but also engineering applications.