4 April 2013 in Journal of Shanghai Jiaotong University (Science)
4 July 2012 in Journal of Zhejiang University-SCIENCE A
This paper deals with an improved bonding approach of surface-bonded fiber Bragg grating (FBG) sensors for airship envelope structural health monitoring (SHM) under the strain transfer theory. A theoretical formula is derived from the proposed model to predict the strain transfer relationship between the airship envelope and fiber core. Then theoretical predictions are validated by numerical analysis using the finite element method (FEM). Finally, on the basis of the theoretical approach and numerical validation, parameters that influence the strain transfer rate from the airship envelope to fiber core and the ratio of effective sensing length are analyzed, and some meaningful conclusions are provided.
26 December 2017 in Inverse Problems in Science and Engineering
Force identification is a crucial inverse problem in structural dynamics. In this paper, a new method integrating Taylor formula algorithm and acceleration transmissibility concept is put forward to identify the magnitude and location of loads in time domain. The Taylor formula algorithm expresses the response vectors as Taylor-series expansion and then, a series of deductions are implemented. Ultimately an explicit discrete equation which associates output acceleration response, structure characteristic and input excitation together is established. After establishing the explicit discrete equation, acceleration transmissibility concept is utilized to identify the location of forces. Under the premise of knowing the acceleration response and structure characteristic, force magnitude can be calculated. To verify the effectiveness of proposed method, one builds up a theoretical simulation model in which different types of dynamic excitations are exerted on an inflatable cantilever beam. Meanwhile, classical state space algorithm is made a contrast with Taylor formula algorithm in the step of force magnitude identification. Calculation results demonstrate that the integration method is capable of identifying the location of excitations precisely. Reconstruction of force time history reaches a higher accuracy compared to state space algorithm as well. In addition, the anti-noise ability of proposed algorithm is discussed.
25 March 2019 in Inverse Problems in Science and Engineering
This paper devotes to identifying the distributed dynamic excitation in time domain via a comprehensive algorithm combining Taylor polynomial iteration and cubic Catmull–Rom spline interpolation. Under the premise of obtaining structural characteristic and node response, Taylor polynomial iteration algorithm is introduced to reconstruct the distributed force amplitudes in node positions of a simple supported beam. Then the load amplitudes at nodes are used as control points, thereby cubic Catmull–Rom spline is adopted to interpolate the complete spatial course of distributed dynamic load along the whole beam. Numerical examples illustrate that the integration method is able to acquire relatively accurate identification result of distributed force. Furthermore, noise immunity of this method is investigated and it displays a strong anti-noise performance.
8 January 2013 in Journal of Zhejiang University-SCIENCE A
The optimization design of the power system is essential for stratospheric airships with paradoxical requirements of high reliability and low weight. The methodology of orthogonal experiment is presented to deal with the problem of the optimization design of the airship’s power system. Mathematical models of the solar array, regenerative fuel cell, and power management subsystem (PMS) are presented. The basic theory of the method of orthogonal experiment is discussed, and the selection of factors and levels of the experiment and the choice of the evaluation function are also revealed. The proposed methodology is validated in the optimization design of the power system of the ZhiYuan-2 stratospheric airship. Results show that the optimal configuration is easily obtained through this methodology. Furthermore, the optimal configuration and three sub-optimal configurations are in the Pareto frontier of the design space. Sensitivity analyses for the weight and reliability of the airship’s power system are presented.
29 March 2017 in Journal of Mechanics
In the theory research and engineering practice, more basic inflatable models are essential for the mechanical property analysis of inflatable structures. Firstly, this paper presents a model of the tapered inflatable cantilever beam based on Timoshenko's theory and analyzes its deformation under a concentrated force. Moreover, the following forces resulting from internal pressure and taper ratio are introduced into the equilibrium equations of the deformed configuration. Thus, the model is optimized compared to the existing one for a straight beam. To verify the effectiveness and the superiority of the established model, the theoretical method based on the model and FEM method are compared by adopting an example about the tapered beams. Finally, the theoretical method is applied in analyzing the influence of geometry and estimating a valid range of taper ratio. By the criterion of the same amount material area, the optimum taper ratio is obtained.