Lung-Hao Hu

Lung-Hao Hu

Auto-generated profile, based on publicly available information

Lung-Hao Hu

National Sun Yat-Sen University

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 April 2013 in Nature Communications
Verified
Journal Article
Open access
PDF file
LHLung-Hao Hu
Lung-Hao Hu
FWFeng-Yu Wu
Feng-Yu Wu
CLCheng-Te Lin
Cheng-Te Lin
AKAndrei N. Khlobystov
Andrei N. Khlobystov
LLLain-Jong Li
Lain-Jong Li
The specific capacity of commercially available cathode carbon-coated lithium iron phosphate is typically 120–160 mAh g−1, which is lower than the theoretical value 170 mAh g−1. Here we report that the carbon-coated lithium iron phosphate, surface-modified with 2 wt% of the electrochemically exfoliated graphene layers, is able to reach 208 mAh g−1 in specific capacity. The excess capacity is attributed to the reversible reduction–oxidation reaction between the lithium ions of the electrolyte and the exfoliated graphene flakes, where the graphene flakes exhibit a capacity higher than 2,000 mAh g−1. The highly conductive graphene flakes wrapping around carbon-coated lithium iron phosphate also assist the electron migration during the charge/discharge processes, diminishing the irreversible capacity at the first cycle and leading to ~100% coulombic efficiency without fading at various C-rates. Such a simple and scalable approach may also be applied to other cathode systems, boosting up the capacity for various Li batteries.

24 May 2016 in Journal of Materials Chemistry A
Verified
Journal Article
Closed access
PDF file
SASyed Ali Abbas
Syed Ali Abbas
MIMohammad Aziz Ibrahem
Mohammad Aziz Ibrahem
LHLung-Hao Hu
Lung-Hao Hu
CLChia-Nan Lin
Chia-Nan Lin
JFJason Fang
Jason Fang
CCChih-Wei Chu
Chih-Wei Chu
The shuttling process involving lithium polysulfides is one of the major factors responsible for the degradation in capacity of lithium–sulfur batteries (LSBs). Herein, we demonstrate a novel and simple strategy—using a bifunctional separator, prepared by spraying poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) on a pristine separator—to obtain long-cycle LSBs. The negatively charged SO3 − groups present in PSS act as an electrostatic shield for soluble lithium polysulfides through mutual coulombic repulsion, whereas PEDOT provides chemical interactions with insoluble polysulfides (Li2S, Li2S2). The dual shielding effect can provide an efficient protection from the shuttling phenomenon by confining lithium polysulfides to the cathode side of the battery. Moreover, coating with PEDOT:PSS transforms the surface of the separator from hydrophobic to hydrophilic, thereby improving the electrochemical performance. We observed an ultralow decay of 0.0364% per cycle when we ran the battery for 1000 cycles at 0.25C—far superior to that of the pristine separator and one of the lowest recorded values reported at a low current density. We examined the versatility of our separator by preparing a flexible battery that functioned well under various stress conditions; it displayed flawless performance. Accordingly, this economical and simple strategy appears to be an ideal platform for commercialization of LSBs.

26 February 2015 in Journal of the American Ceramic Society
Verified
Journal Article
Closed access
PDF file
LHLung‐Hao Hu
Lung‐Hao Hu
RRRishi Raj
Rishi Raj

2 April 2015 in Nanoscale
Verified
Journal Article
Closed access
PDF file
PKPushpendra Kumar
Pushpendra Kumar
FWFeng-Yu Wu
Feng-Yu Wu
LHLung-Hao Hu
Lung-Hao Hu
SASyed Ali Abbas
Syed Ali Abbas
Jun MingJun Ming
Jun Ming
LLLain-Jong Li
Lain-Jong Li
Elementary sulphur (S) has been shown to be an excellent cathode material in energy storage devices such as Li–S batteries owing to its very high capacity. The major challenges associated with the sulphur cathodes are structural degradation, poor cycling performance and instability of the solid–electrolyte interphase caused by the dissolution of polysulfides during cycling. Tremendous efforts made by others have demonstrated that encapsulation of S materials improves their cycling performance. To make this approach practical for large scale applications, the use of low-cost technology and materials has become a crucial and new focus of S-based Li-ion batteries. Herein, we propose to use a low temperature spraying process to fabricate graphene/S electrode material, where the ink is composed of graphene flakes and the micron-sized S particles prepared by grinding of low-cost S powders. The S particles are found to be well hosted by highly conductive graphene flakes and consequently superior cyclability (∼70% capacity retention after 250 cycles), good coulombic efficiency (∼98%) and high capacity (∼1500 mA h g−1) are obtained. The proposed approach does not require high temperature annealing or baking; hence, another great advantage is to make flexible Li-ion batteries. We have also demonstrated two types of flexible batteries using sprayed graphene/S electrodes.

1 January 2011 in Journal of Power Sources
Verified
Journal Article
Closed access
LHLunghao Hu
Lunghao Hu
RCRiccardo Ceccato
Riccardo Ceccato
RRR. Raj
R. Raj

1 May 2015 in Journal of Alloys and Compounds
Verified
Journal Article
Closed access
PKPushpendra Kumar
Pushpendra Kumar
FWFeng-Yu Wu
Feng-Yu Wu
TCTung Chou
Tung Chou
LHLung-Hao Hu
Lung-Hao Hu