Andris Freimanis

Andris Freimanis

Auto-generated profile, based on publicly available information

Andris Freimanis

Riga Technical University

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 November 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AFAndris Freimanis
Andris Freimanis
Sakdirat KaewunruenSakdirat Kaewunruen
Sakdirat Kaewunruen
Rail surface defects are a serious concern for railway infrastructure managers all around the world. They lead to poor ride quality due to excess vibration and noise; in rare cases, they can result in a broken rail and a train derailment. Defects are typically classified as ‘rail studs’ when they initiate from the white etching layer, and ‘rail squats’ when they initiate from rolling contact fatigue. This paper presents a novel investigation into rail squat initiation and growth simulations using peridynamic theory. To the best of the authors’ knowledge, no other comprehensive study of rail squats has been carried out using this approach. Peridynamics are well-suited for fracture problems, because, contrary to continuum mechanics, they do not use partial-differential equations. Instead, peridynamics use integral equations that are defined even when discontinuities (cracks, etc.) are present in the displacement field. In this study, a novel application of peridynamics to rail squats is verified against a finite element solution, and the obtained simulation results are compared with in situ rail squat measurements. Some new insights can be drawn from the results. The outcome exhibits that the simulated cracks initiate and grow unsymmetrically, as expected and reported in the field. Based on this new insight, it is apparent that peridynamic modelling is well-applicable to fatigue crack modeling in rails. Surprisingly, limitations to the peridynamic analysis code have also been discovered. Future work requires finding an adequate solution to the matter-interpenetration problem.

1 January 2017 in Procedia Engineering
Verified
Journal Article
Open access
AFAndris Freimanis
Andris Freimanis
APAinars Paeglitis
Ainars Paeglitis

17 August 2024 in Materials Science and Engineering: A
Verified
Journal Article
Open access
MLMatti Lindroos
Matti Lindroos
GSGuilherme Corrêa Soares
Guilherme Corrêa Soares
ABAbhishek Biswas
Abhishek Biswas
WKWade Karlsen
Wade Karlsen
AFAndris Freimanis
Andris Freimanis
ALAnssi Laukkanen
Anssi Laukkanen

1 October 2018 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
Sakdirat KaewunruenSakdirat Kaewunruen
Sakdirat Kaewunruen
RJR Janeliukstis
R Janeliukstis
AFA Freimanis
A Freimanis
KGK Goto
K Goto
After a railway track experiencing dynamic loading, the track settles and causes ballast to deform, spread and sometime damage. Without appropriate maintenance, void and pocket of ballast underneath railway sleepers can establish overtime and impair the ride quality of train services. In this study, the emphases will be placed on the application of non-destructive vibration-based technology, to investigate and evaluate dynamic characteristics of voided railway concrete sleepers, which are the fundamental element to provide track support to railway systems. The study has developed a curvature-based damage detention method to identify ballast voids under railway track sleepers. This method can be easily deployed in the field by using fibre bragg grating strain sensors to measure strains for curvature analysis. In this study, the assumption is that the time-dependent material degradation negligibly affects the curvature ratios. The dynamic finite element model has been established and validated for railway sleepers in the field. A variety of losses of ballast support have been simulated using the validated model. The dynamic mode shape has been analysed to evaluate curvature ratios under different types of ballast losses. Although the method provides positive outcomes, the advantages, disadvantages and limitation of the method are then identified and discussed.

15 September 2020 in Journal of Computational Design and Engineering
Verified
Journal Article
Open access
AFAndris Freimanis
Andris Freimanis
APAinars Paeglitis
Ainars Paeglitis
If structural damage remains undetected and is allowed to grow, structure's load-bearing capacity deteriorates, which can lead to costly repairs or in extreme cases its collapse. Modal analysis is widely used to detect structural damage because, when damage, such as cracks, is introduced, structure's geometrical and/or mechanical properties change, and these changes can be used for damage detection. Peridynamics is a non-local alternative to the continuum mechanics theory that represents forces and displacements using integral equations, which are defined even with discontinuous displacement fields, thus making this theory an attractive option for damage modeling. In this paper, authors verify peridynamic (PD) modal analysis against finite-element (FE) results, and validate it against experimental modal analysis results. The modal solver was implemented in the open-source program Peridigm and four different damage configurations were considered for verification and validation. The results show close agreement between the PD and the FE results, and the PD and the experimental results. Moreover, PD modal frequencies are shown to have similar accuracy to experimental data as the FE results. It is also shown that the frequency shifts are comparable between all three types of modal analysis. The PD mode shapes agreed well with both the FE and the experimental mode shapes at all considered damage configurations. Furthermore, the change in mode shapes from the introduced damage is similar in all three analyses.

25 March 2016 in The Baltic Journal of Road and Bridge Engineering
Verified
Journal Article
Closed access
APAinars Paeglitis
Ainars Paeglitis
AFAndris Freimanis
Andris Freimanis
Traffic load models available in building standards are most often developed for short or medium span bridges, however, it is necessary to develop traffic load models just for long span bridges, because the most unfavourable traffic situations are different. Weigh-in-Motion system data from highway A1 and A3 were used in this study. Measurement errors from data were cleaned using two groups of filters. The first group was based on vehicle validity codes recorded by both systems, if any circumstances might have influenced the measurements, the second group cleaned data using general filters for all vehicles and specific filters for trucks and cars. Additionally, vehicles were adjusted for influence of temperature. Data cleaning increased the average gross vehicle, so it could be considered as a conservative choice. Six traffic scenarios, each with different percentage of cars in the traffic, were made to assess the difference in loads from different traffic compositions. Traffic loads for long-span bridges were calculated using two approaches: the first assuming constant span length, the second, using influence lines from a bridge currently in design stage. Gumbel distribution were fitted to the calculate loads and they were extrapolated to probability of exceedance of 5% in 50 year period. Results show that influence line approach yield larger loads than those from constant-span. Both approaches result in loads larger than ones in Eurocode 1 Load Model 1, however, increase might have been caused by an increase in vehicle weight.