31 January 2024 in IEEE Transactions on Electron Devices
The design, fabrication, and experimental measurement of a broadband and compact TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ (symbols $\Box$ $^{^{^{}}}$ and $\circ $ represent the rectangular and circular waveguides, respectively) mode converter is presented in this article. The proposed mode converter consists of three components, including a TE $^{\Box}_{\text{10}}$ –TE $^{\Box}_{\text{20}}$ mode converter based on a two-way H-T junction power divider, a TE $^{\Box}_{\text{20}}$ –TE $^{+}_{\text{22}}$ mode converter with variable cross-shaped waveguide, and a TE $^{+}_{\text{22}}$ –TE $^{\circ}_{\text{01}}$ mode converter. Two distinct design schemes have been employed for the first part of the TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ mode converter, which are based on two-way $^{^{^{}}}$ H-T junction power dividers with a path difference of odd times half-waveguide wavelength (Scheme 1) and a 180 $^{\circ}$ phase shifter (Scheme 2), respectively. This mode converter is highlighted by the significant advantage of high conversion efficiency over a wide bandwidth with a relatively easy-to-fabricate structure, which is evidenced by the measurement of two identical back-to-back joined mode converters based on Scheme 1. Measurement results matched with simulation ones within reasonable accuracy, which predicted that a 1-dB transmission bandwidth of $\sim$ 56.7 GHz was obtained. Meanwhile, the reflection coefficient S $_{\text{11}}$ was below $-$ 13.2 dB over that bandwidth.
28 December 2023 in IEEE Transactions on Electron Devices
The design and cold test verification for a 220-GHz sheet beam traveling-wave tube (SB-TWT) are presented in this article. Although there are numerous studies regarding the design and simulation of SB-TWTs, most of them focus on the research of one or several component(s) of the SB-TWT. And, the beam–wave interaction simulations are generally based on ideal situations, for example, an ideal electron beam and an ideal focusing magnetic field. In order to improve the accuracy of the simulation predictions, two measures have been implemented in this study: 1) the beam–wave interaction cosimulation of the entire tube is carried out, in which the sheet electron beam generated by the electron gun (E-Gun) and the focusing magnetic field produced by the periodically cusped magnetic focusing structure are employed and 2) the remodeled high-frequency system based on the cold-cavity test results is used for the beam–wave interaction simulation. In addition, the high-frequency system’s microfabrication and cold test are also presented. Measured S-parameters of the high-frequency system showed a 3-dB transmission bandwidth of $\sim$ 35.3 GHz (222.5–257.8 GHz). The beam–wave interaction cosimulation, employing the aforementioned measures, predicted an output power exceeding 85.8 W within a bandwidth of 20 GHz (220–240 GHz), accompanied by a corresponding gain of $\ge$ 22.45 dB.
27 September 2024 in IEEE Electron Device Letters
The long-distance and stable transmission of multiple sheet electron beams is one of the most critical challenges hindering the development of integrated multiple sheet electron beam devices. A uniform magnetic focusing structure is an effective scheme to focus multiple sheet electron beams, but it significantly increases the size and weight. To address this issue, this letter proposes a novel weak pole offset periodic cusped magnetic (WPO-PCM) focusing structure with a more compact geometry. In this structure, both the horizontal and vertical sides of each sheet electron beam are primarily confined by a large Bz , while a small By is used for fine-tuning. The theoretical analysis, simulation, fabrication, and measurement of this WPO-PCM focusing structure are presented. The measured magnetic fields coincide well with their simulated counterparts, indicating that the structure could provide a peak B z of 0.8 T. The effectiveness of the methodology for this WPO-PCM is further verified through the co-simulation of the dual-sheet beam electron optic system and the beam-wave interaction of the entire traveling wave tube.
29 June 2023 in IEEE Transactions on Plasma Science
A novel design methodology of a TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter for gyrotron traveling-wave tubes (gyro-TWTs) is presented in this article. This type of mode converter is characterized by its broad bandwidth. The proposed mode converter consists of two-mode conversion sections (TE $^{\mathrm{\pmb{\circ }}}_{{10}}$ –TE $^{\mathrm{\pmb{\circ}}}_{{20}}$ and TE $^{\mathrm{\pmb{\circ}}}_{{20}}$ –TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ ) and an overmoded coupling section. The feeding TE $^{\mathrm{\pmb{\circ }}}_{{10}}$ mode is first converted into the TE $^{\mathrm{\pmb{\circ }}}_{{20}}$ mode, then coupled by using an overmoded coupling structure, and finally converted into the desired TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode. For verification, two $H$ -band (220–325 GHz) back-to-back joined TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter prototypes were microfabricated and measured. The cold test showed that a measured 3-/2-dB transmission bandwidth of 58.9 GHz (235.2–294.1 GHz)/56.3 GHz (235.2–291.5 GHz) for the TE $^{\mathrm{{\circ}}}_{{21}}$ /TE $^{\mathrm{{\circ}}}_{{01}}$ mode converter was obtained.
22 October 2024 in IEEE Transactions on Terahertz Science and Technology
The study of three types of magnetic focusing structures for terahertz band sheet beam traveling wave tubes (SB-TWTs) is presented in this article. Although there are a lot of reported literatures regarding the study of magnetic focusing structures, most of them just focused on a single type of focusing structure and lack of systematic research (for example, only simulation study), with a limited discourse on the comparative performance across different types of focusing structures. In addition, many reported simulations regarding the focusing structures are normally based on the ideal electron beam, resulting in reduced simulation accuracy to some extent. In this article, three types of focusing structures (uniform magnetic (UM) / pole offset periodic cusped magnetic (PO-PCM) / PCM-tunable quadrupolar magnet (PCM-TQM) focusing structures) are studied in detail by theoretical analysis and simulation design. The PO-PCM focusing structure is experimentally studied as a representative. Simulation results based on the electron beam emitted from the designed sheet beam electron gun show that a stable long-distance transmission over 112 mm and 85 mm can be achieved with the UM focusing structure and the PCM focusing structures, respectively. To verify the design, the microfabrication and test of the PO-PCM focusing structure is carried out as a representative. The measured magnetic field matches well with its simulated and theoretically calculated counterparts. The beam-wave interaction co-simulation results based on different focusing structures have a discrepancy among them.
15 April 2024 in IEEE Transactions on Electron Devices
In comparison to single-sheet electron beam devices, the output power of multiple-sheet electron beam devices is hopeful to be significantly enhanced due to the increased beam current. One of the most important issues restricting the development of multiple-sheet electron beam devices is the generation and stable transmission of multiple-sheet electron beams. In this article, the design of two dual-sheet-beam electron optic systems (EOSs) with significant features of long transmission distance and high beam current density is presented. Additionally, both of them have achieved a high compression factor and a large aspect ratio. To verify the design, a uniform permanent magnetic focusing structure was fabricated and measured, showing that it could provide an axial magnetic field of ~0.4 T. The designed EOS is applied in a dual-sheet electron beam backward wave oscillator (BWO) and simulation results of the entire BWO show that it is capable of generating an output power of >200 W over a wide bandwidth of 15 GHz (218–233 GHz).