30 August 2019 in Gornyi Zhurnal
The paper is devoted to the creation of methane and dust explosion risk assessment method for coal mines for implementation of the risk-oriented approach to supervisory activities and also for solving the information support problems in managerial decisions making procedures, which aims to reducing the probability of methane and dust explosions in underground workings of coal mines. The premises for transition to the dynamic model of the risk-oriented approach are indicated. The information about dynamics of fatal injuries coefficient for underground coal mining for the last 10 years is provided. The model of expert system, based on fuzzy logic, is proposed. The model is designed for risk assessment in condition of information uncertainty in case of incompleteness or lack of reliable data about the impact of risk factors on the mine safety level. On the basis of the investigation of accidents materials in Russia in 2006-2017, the structural scheme of the expert system was created. Input parameters of the model and results of expert assessment of risk factors are described. The fuzzy logic inference knowledge base was created with using of the MATLAB Fuzzy Logic Toolbox computing environment for taking into account the influence of the complex of geological, technical and subjective factors on the risk of methane and dust explosions. The developed model allows ranking the coal mine sites according to the explosions risk levels, which was proved by processing of the initial data sample. The developed model can be integrated into multifunctional safety systems to assess the risk of various type accidents in real time.
23 January 2021 in Journal of Mining Institute
The article is devoted to the study of the problem of spontaneous combustion of energy grades of coal not only during storage, but also during transportation. As the main samples for the study, the energy grades of SS and Zh coals were selected. The main task of the scientific research was to study the rate of cooling and heating of coal depending on their thermophysical parameters and environmental parameters. To solve this problem, the authors used both the author's installations designed to study the thermophysical parameters of the spontaneous combustion process (the Ya.S.Kiselev method), and the NETZSCH STA 449 F3 Jupiter synchronous thermal analysis device, the NETZSCH Proteus Termal Analysis software package. On the basis of a complex study of the spontaneous combustion process, the authors of the article obtained the kinetic characteristics of the spontaneous heating process (activation energy and pre-exponential multiplier). Nomograms of the permissible size of coal density of different types and shapes of accumulation depending on the ambient temperature are presented, practical recommendations for the prevention (avoidance) of spontaneous combustion of coal fuel are given.
1 January 2018 in Mining informational and analytical bulletin
SUSaint Petersburg Mining University
Saint Petersburg Mining University
SRSaint-Petersburg University of State Fire Service of EMERCOM of Russia
Saint-Petersburg University of State Fire Service of EMERCOM of Russia
???????? ???????????? ??????? ???????????? ? ???????????????? ??????? ?? ???????????????? ? ???????????? ???????? ????
29 April 2022 in Journal of Mining Institute
The results of the analysis of statistical data on accidents at Russian mines caused by explosions in the workings space have shown that explosions of methane-dust-air mixtures at underground coal mines are the most severe accidents in terms of consequences. A detailed analysis of literature sources showed that in the total number of explosions prevails total share of hybrid mixtures, i.e. with the simultaneous participation of gas (methane) and coal dust, as well as explosions with the possible or partial involvement of coal dust. The main causes contributing to the occurrence and development of dust-air mixture explosions, including irregular monitoring of by mine engineers and technicians of the schedule of dust explosion protective measures; unreliable assessment of the dust situation, etc., are given. The main problem in this case was the difficulty of determining the location and volume of dust deposition zones in not extinguished and difficult to access for instrumental control workings. Determination of the class-shape of coal dust particles is a necessary condition for constructing a model of the dust situation reflecting the aerosol distribution in the workings space. The morphological composition of coal mine dust fractions with dispersion less than 0.1 has been studied. Particle studies conducted using an LEICA DM 4000 optical microscope and IMAGE SCOPE M software made it possible to establish the different class-shapes of dust particles found in operating mines. It was found that the coal dust particles presented in the samples correspond to the parallelepiped shape to the greatest extent. The mathematical model based on the specialized ANSYS FLUENT complex, in which this class-form is incorporated, is used for predicting the distribution of explosive and combustible coal dust in the workings space. The use of the obtained model in production conditions will allow to determine the possible places of dust deposition and to develop measures to prevent the transition of coal dust from the aerogel state to the aerosol state and thereby prevent the formation of an explosive dust-air mixture.
1 January 2022 in Mining informational and analytical bulletin
1 January 2021 in Mining informational and analytical bulletin