10 March 2023 in IEEE Sensors Journal
Measurement of particulate matter, i.e. fine/ultrafine dust is important for monitoring our surrounding environment. We demonstrate the fabrication of lenticular fiber based fine/ultrafine dust measurement devices for monitoring the density and size of dust. The plano-convex lenticular fibers were fabricated by CO 2 laser polishing technique. The optical lens, used in the conventional light scattering based fine/ultrafine dust measurement devices, was replaced by a plano-convex lenticular optical fiber to reduce the size and complexity of the dust measurement device. We utilized light emitting diode as the light source of the fine/ultrafine dust density measurement device. The fabricated device could indicate the dust density level (good, normal, bad, and very bad) according to Korean standard. To estimate the size of the dust particulates, we fabricated a dust size measurement device that consists a compact laser diode, a lenticular fiber, and a photo detector. We are successful in estimating the size of both fine and ultrafine particulate matters by detecting the power of the scattered light coming from the dust particulates. Dust size down to 0.9 μm was detected using our dust measurement device. Our proposed dust measurement devices are simple, small, and cost effective and can be considered as a candidate for portable applications.