Sergey Koshel

Sergey Koshel

Auto-generated profile, based on publicly available information

Sergey Koshel

Київський національний університет технологій та дизайну

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2024 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
MZM Zalyubovskii
M Zalyubovskii
IPI Panasyuk
I Panasyuk
SKS Koshel
S Koshel
OKO Koshel
O Koshel
LAL Akimova
L Akimova
Purpose. Geometric synthesis of a statically determined spatial eight-link hinged mechanism with rotary kinematic pairs of a barreling machine, in which the working capacity carries out a complex spatial movement, followed by an analytical study of the structural features of the machine mechanism. Methodology. An analytical approach was used in the study of the eight-link hinged mechanism with rotary kinematic pairs, which consists of geometric and structural synthesis, and the design of barreling machine was modeled in the SolidWorks 2021 automated design software. Findings. One of the possible options for freeing the spatial mechanism of the barreling machine from passive connection is proposed, the synthesis of a statically determined spatial eight-link hinged mechanism with rotational kinematics is carried out. An appropriate design of a barreling machine with two driving links has been developed, the use of which creates conditions for increasing its reliability during operation and simultaneously increasing the productivity of performing the corresponding barreling operations. Analytical studies of the main geometric and structural parameters of the barreling machine were carried out. Originality. The connection between the corresponding geometric parameters of the synthesized statically determined spatial eight-link mechanism is established, which allows determining the rational ratio of the lengths of its links to each other. The relationship between the lengths of the links, their position and the angle of swing of the rocker arm together with the drive shaft of the machine is also established. Practical value. The synthesis of a statically determined spatial eight-link hinged mechanism with rotary kinematic pairs with two degrees of mobility was performed. Based on the synthesis of the mechanism, a new design of the barreling machine with two driving links was developed. Mathematical expressions for calculating the main geometric relationships of the link lengths of the developed machine structure were obtained.

1 January 2018 in Odes’kyi Politechnichnyi Universytet. Pratsi
Verified
Journal Article
Open access
KDKyiv National University of Technologies and Design
Kyiv National University of Technologies and Design
SKS. Koshel
S. Koshel
GKG. Koshel
G. Koshel

1 January 2021
Verified
Book
Closed access
KDKyiv National University of Technologies and Design
Kyiv National University of Technologies and Design
LBLeonid Berezin
Leonid Berezin
SKSerhiy Koshel
Serhiy Koshel
AKAnna Koshel
Anna Koshel
VMViktor Malyshev
Viktor Malyshev
OUOpen International University of Human Developmеnt Ukraine
Open International University of Human Developmеnt Ukraine
The study guide consists of two parts of theoretical information on the main topics of the "Theoretical Mechanics" course. The first part includes statics and kinematics sections, the second – dynamics. The study guide can be used for the general professional training of students of higher technical educational institutions of all forms of education, it is useful in the form of a reference and methodical guide for masters, postgraduate students, engineering and technical workers in the independent study of the basics or deepening of knowledge in "Theoretical Mechanics". For students of VZO, field of knowledge 27 "Transport", specialty 274 "Automotive transport", field of knowledge 13 "Mechanical engineering", specialty 133 "Industrial mechanical engineering" and 131 "Applied mechanics".

28 May 2026 in Herald of Khmelnytskyi National University. Technical sciences
Verified
Journal Article
Open access
ОКОлександр Кошель
Олександр Кошель
МЗМарк Залюбовський
Марк Залюбовський
СКСергій Кошель
Сергій Кошель
ГКГанна Кошель
Ганна Кошель
The results of an experimental study on the mutual influence of the rotational frequencies of two driving shafts of the developed tumbling machine and the radius of a cylindrical processing container on the conditions governing changes in the motion regime of the working bulk of parts in the working container were obtained and mathematically processed. An experimental research plan was developed to conduct the study. During its implementation, interdependencies were established between the rotational frequencies of the driving shafts responsible for the carrier and relative motions of the cylindrical working container, which performs complex spatial motion, and its radius, on the motion regimes of the working bulk of parts. Experimental investigations were carried out to determine the influence of processing containers of different diameters used in the developed tumbling machine on the conditions for the formation of a mixed motion regime of the working bulk of parts in the working container. The capability of the machine of the developed design to operate with cylindrical processing containers of different diameters installed was practically demonstrated. The machine ensures the motion regimes of the working bulk of parts required for processing in the container under conditions of independently varying rotational frequencies of its two driving shafts, differing in both magnitude and direction. It was established that varying the radius of the cylindrical processing container from a smaller to a larger value affects the interdependence between the parameters of the relative and carrier rotational frequencies of the machine driving shafts, at which a change in the motion regime of the working bulk from cascading to cascading–waterfall is observed. An increase in the container radius from a smaller to a larger value necessitates a simultaneous decrease in both the carrier and relative rotational frequencies of the driving shafts. The established interdependencies between the parameters of the relative and carrier rotational frequencies of the machine driving shafts make it possible to vary them in such a way that, for a selected diameter of the cylindrical processing container, motion of the working bulk with the required intensity along and relative to the geometric axis of the container can be achieved, thereby creating optimal conditions for their processing.

26 March 2026 in Herald of Khmelnytskyi National University. Technical sciences
Verified
Journal Article
Open access
ОКОлександр Кошель
Олександр Кошель
МЗМарк Залюбовський
Марк Залюбовський
СКСергій Кошель
Сергій Кошель
ГКГанна Кошель
Ганна Кошель
The article presents the results of an experimentally conducted and mathematically processed study of the mutual influence of the rotational frequencies of two driving shafts and the inclination angle of the working container relative to the horizontal in a tumbling machine specially designed for processing light industry components on the motion regime of the workpiece bulk within the working container. A developed experimental research plan is presented for studying the influence of the inclination angle of the geometric axis of a cylindrical working container of a tumbling machine on the motion regime of the workpiece bulk in a working container with complex spatial motion. The influence of the container inclination angle on the motion regime of the workpiece bulk in the working container was experimentally investigated for various inclination angles. Mathematical models were obtained that establish the relationship between the rotational frequencies of the relative and carrier driving shafts of the machine of the developed design, at which a transition of the motion regime of the workpiece bulk in the container from cascading to cascading–waterfall occurs; their adequacy was verified. It was established that varying the inclination angle of the working container, measured at the vertically upper position of the crank, from a smaller to a larger technologically feasible value leads to the necessity of reducing the carrier rotational frequency and simultaneously increasing the relative rotational frequency of the driving shafts of the tumbling machine in order to ensure a cascading–waterfall motion of the workpiece bulk. To maintain an unchanged motion regime of the workpieces in the container with the driving shaft responsible for the carrier motion of the workpiece bulk stopped, an increase in the inclination angle of the container from a smaller to a larger value requires an increase in the rotational frequency of the shaft responsible for the relative motion of the container. Conversely, with the driving shaft responsible for the relative motion of the container stopped, an increase in the inclination angle necessitates a decrease in the rotational frequency of the shaft responsible for the carrier motion of the container. The obtained results can be used to determine the rotational frequencies of the driving shafts required for processing workpieces of a specific assortment in order to achieve optimal processing results on the machine of the developed design.

31 August 2023 in Herald of Khmelnytskyi National University. Technical sciences
Verified
Journal Article
Closed access
СКСергій Кошель
Сергій Кошель
ГКГанна Кошель
Ганна Кошель
МЗМарк Залюбовський
Марк Залюбовський
ОКОлександр Кошель
Олександр Кошель
A structural study of a complex planar mechanism of the fourth class with one driving link and a moving closed loop was performed. The contour has the form of a quadrangle, which is formed by three links that have plane-parallel movement and one link that rotates around a fixed axis. The circuit is formed by four links: three connecting rods, two of which are complex links and are located opposite each other, and one rocker, which takes part in the formation of three kinematic pairs. Structurally, the set of six links and nine kinematic pairs, which is the basis of a complex mechanism, belongs to the group of links of the fourth class and the third order. We have developed possible variants of structural groups of links of the fourth class of the third order with a closed circuit, in which the nature of kinematic pairs and their location were taken into account. For various variants of structural groups of links, we obtained structural formulas of structures of mechanisms of the fourth class. We used the method of structural change of the actual leading link of the mechanism with another conditionally possible one. The obtained results of the study allow us to determine the sequence of further studies of the fourth-class mechanism with one structural group of higher-class links in the form of a second-class mechanism with three sequentially connected structural groups of the corresponding class.