5 April 2015 in Science and Technology of Nuclear Installations
On the basis of the condition for nuclear burning wave existence in the neutron-multiplying media (U-Pu and Th-U cycles) we show the possibility of surmounting the so-called dpa-parameter problem and suggest an algorithm of the optimal nuclear burning wave mode adjustment, which is supposed to yield the wave parameters (fluence/neutron flux, width and speed of nuclear burning wave) that satisfy the dpa-condition associated with the tolerable level of the reactor materials radioactive stability, in particular that of the cladding materials. It is shown for the first time that the capture and fission cross sections of238U and239Pu increase with temperature within 1000–3000 K range, which under certain conditions may lead to a global loss of the nuclear burning wave stability. Some variants of the possible stability loss due to the so-called blow-up modes (anomalous nuclear fuel temperature and neutron flow evolution) are discussed and are found to possibly become a reason for a trivial violation of the traveling wave reactor internal safety.
24 April 2025 in Acta Scientiarum Polonorum. Architectura
The unrestrained growth in the amount and rate of production of hazardous medical waste in the context of the Russian-Ukrainian war critically exacerbates the environmental situation in Ukraine. At the same time, existing traditional methods and technological means are not able to ensure their complete environmentally safe processing and disposal. The paper considers an alternative high-temperature technology for plasma-chemical pyrolysis of medical waste at 1,100−1,250°C, which is implemented in the form of a Plazmon-3 mobile plasma pyrolysis unit, designed and built based on the PUN-1 domestic universal plasma generator. The paper also describes the design, principle of operation, engineering and physical principles underlying the creation of the Plazmon-3, designed to dispose of any type and category of medical waste by destroying it under the action of a high-temperature plasma torch generated by the PUN-1 DC plasma generator, as well as its main operational characteristics. Air, nitrogen, argon, helium, and other gases can be used as plasma-forming gases for the installation. The paper describes the advantages of using high-temperature plasma-chemical pyrolysis for the disposal of hazardous medical and other wastes, which make this technology, in terms of its environmental safety, beyond competition and, unlike its smoke-emitting counterparts, capable of destroying medical waste directly at the point of its generation without forming environmentally hazardous residues and emissions.
3 July 2023 in Ecological Engineering & Environmental Technology
The developed alternative method of analyzing the safety of the active zone of reactor installations is justified for improving the thermophysical properties and composition of nuclear fuel, designs of heat-releasing assemblies, reactor operation modes at increased or reduced power, etc. The...
1 January 2017 in Мiждисциплiнарнi дослiдження складних систем
The main aim of this paper is to solve the technological problems of the TWR based on the technical concept described in our priority of invention reference [1], which makes it impossible, in particular, for the fuel claddings damaging doses of fast neutrons to excess the 200 dpa limit. Thus the essence of the technical concept is to provide a given neutron flux at the fuel claddings by setting the appropriate speed of the fuel motion relative to the nuclear burning wave. The basic design of the fast uranium-plutonium nuclear traveling-wave reactor with a softened neutron spectrum is developed, which solves the problem of the radiation resistance of the fuel claddings material.
4 February 2025 in Construction Engineering
Today, the situation with spent nuclear fuel (SNF) is still complicated due to the lack of safe technologies for its cost-effective and environmentally friendly reprocessing and safe final disposal. Spent nuclear fuel is not waste in the classical definition and understanding. In this paper, spent nuclear fuel is defined as a valuable secondary energy raw material. The paper concludes that further, socially acceptable and guaranteed safe development of the global nuclear power industry is possible only under the condition of absolute priority of nuclear and environmental safety of the entire nuclear fuel cycle (NFC). In this regard, a new technology of the G5 generation based on frontal neutron-combustion nuclear power reactors is proposed to solve complex environmental problems associated with spent nuclear fuel.
17 December 2024 in Construction Engineering
The protection of the environment and human health from the negative impact of waste, in particular medical and pharmaceutical waste, is a priority in the field of waste management. The term "medical waste" defines the full range of all categories and types of medical waste (MW) that are classified as hazardous in Ukraine. The unrestrained growth of the amount and rate of production of hazardous medical waste in the context of the Russian-Ukrainian war (MW) critically exacerbates the environmental situation in Ukraine. However, existing methods and technological means are not able to ensure their complete environmentally safe processing and utilization. The article analyzes the peculiarities of the method of incineration of medical, pharmaceutical and hospital waste. It is demonstrated that plasma arc technologies and plasma-chemical pyrolysis technologies are well-proven and commercially attractive for their application on an industrial scale, including in the medical field, for the disposal, recycling and destruction of hazardous waste. The incineration of medical waste in the open air or in incinerators has temperature limits of no more than 500 oC. The paper considers the technology of plasma-chemical pyrolysis at 1100-1250 oC as a high-temperature alternative to medical waste incineration, which is implemented in the form of a mobile plasma pyrolysis unit "Plazmon-3 , developed and created on the basis of the domestic plasma generator PUN-1. The advantages of using high-temperature plasma-chemical pyrolysis are shown, which make it, in terms of environmental safety, beyond the competition and, unlike smoke-emitting analogues, plasma-chemical pyrolysis technologies destroy medical waste without forming environmentally hazardous residues