Wolfgang Kalkreuth

Wolfgang Kalkreuth

Auto-generated profile, based on publicly available information

Wolfgang Kalkreuth

Instituto de Geociências, UFRGS, Porto Alegre, Brazil

Research Focus & Metrics

Academic Career Length

36Years (1991-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2013 in Energy Exploration & Exploitation
Verified
Journal Article
Open access
WKW. Kalkreuth
W. Kalkreuth
MHM. Holz
M. Holz
JLJ. Levandowski
J. Levandowski
MKM. Kern
M. Kern
JCJ. Casagrande
J. Casagrande
BKBernhard Krooss
Bernhard Krooss
This study investigates the CBM generation and CO2 storage capacity of the coal-bearing Permian age Rio Bonito Formation in the Santa Terezinha Coalfield, Paraná Basin, Brazil. In order to assess the volumetrics of the coal seams a fourth-order sequence stratigraphic framework of the coal-bearing succession was established based on parasequence boundaries. A 3D geometric model based on data from 36 well logs was developed, and enabled subdivision of the study area into regions with very different CBM potential, due to variable cumulative coal thickness, depths and presence/absence of diabase. Strata of the coal-bearing Rio Bonito Formation were penetrated in well CBM001-ST-RS at a depth of 575.70 to 638.35 m, from which twelve coal seams and carbonaceous shales, ranging in thickness from 0.15 to 1.77 m, were retrieved for analysis. Gas desorption values range from 0.3 to 2.2 cm3/g. Gas composition is dominated by methane (> 94 Vol%). Gas isotopic analyses suggest a mixed biogenic and thermogenic origin. Vitrinite reflectance indicate a rank of high volatile A bituminous coal, with semi-anthracite occurring in contact with igneous rocks. The majority of the samples has vitrinite group contents > 50 Vol%, mineral matter-free basis. Ash yields range from 42.1 to 92.8 wt.%, whereas sulphur contents range from 0.1 to 7.7 wt.%. Volatile matter and calorific values (dry ash-free) range from 37.6 to 79.4 wt.%, and 2352 to 8107 kcal/kg, respectively. Mineral composition of the samples is dominated by quartz and kaolinite, whereas major element analyses show that SiO2 is most abundant. The 3D model allowed volumetric calculation for the coal seams and formed the basis for calculations of gas content and CO2 storage capacity. According to the 3D model the four coal-bearing parasequences of the study area contain a coal volume on the order of 3212 × 10 6 m3 suggesting a resource base of 5.5 × 109 m3 of methane associated with the coal seams and carbonaceous shales of the study area. The methane and carbon dioxide sorption capacities show a high positive correlation with TOC content. The coal seams appear to be undersaturated, since sorption capacity is significantly higher than the desorbed gas volume. The CO2 sorption capacity at mean reservoir pressure was up to 7 times higher than the methane sorption capacity. Based upon sorption capacities and reservoir conditions, a storage potential of 13.8 Gt CO2 in coal seams and carbonaceous shales of the study area is estimated.

1 June 2008 in Revista Brasileira de Geociências
Verified
Journal Article
Open access
PDF file
WKWolfgang Kalkreuth
Wolfgang Kalkreuth
MHMichael Holz
Michael Holz
JCJunia Casagrande
Junia Casagrande
RCRodrigo Cruz
Rodrigo Cruz
TOTiago dos Santos Oliveira
Tiago dos Santos Oliveira
Silvia Beatriz Alves RolimSilvia Beatriz Alves Rolim
Silvia Beatriz Alves Rolim
O Potencial de Coalbed Methane (CBM) na jazida da Santa Terezinha - modelagem 3D e avaliação do poço de exploração CBM001-ST-RS

1 June 2014 in Energy Exploration & Exploitation
Verified
Journal Article
Open access
WKW. Kalkreuth
W. Kalkreuth
JLJ. Levandowski
J. Levandowski
TDT. Delgado
T. Delgado
RSR. Scheffer
R. Scheffer
SMS.M. Maia
S.M. Maia
SBS. Barrionuevo
S. Barrionuevo
The present study investigates the petrographical and chemical characteristics of the feedcoal used in the coal-fired Figueira Power Plant, Paraná, Brazil, and the chemical characteristics of fly and bottom ashes generated in the combustion process. Chemical characteristics of soils, water and plants collected in the proximity (250 to 5000 m) of the power plant were also studied in order to determine if there exist any contamination caused by emissions of the power plant. The feedcoal is of high volatile C/B rank. Mean ash content is 30.3 wt% and the mean sulphur content is 4.3 wt%. Trace element concentrations > 500 mg·kg−1 include Zn and As, trace elements > 100 mg·kg−1 include Mn, B, Pb and Sn, and trace elements > 50 mg·kg−1 include Cr, U, V. For fly and bottom ashes the highest trace element concentrations were recorded for Zn, As, Mn, Sn and B, with most trace element enriched in the fly ashes. In the soil samples the mean values of the trace elements are highly variable ranging from < 1 mg·kg−1 for elements such as Cd, Sb, Se and Tl to concentrations > 20 mg·kg−1 for elements such as B, Cr, Mn, V and Zn. At 5 sample locations out of 38 As concentrations were found to exceed the upper limits considered by the Brazilian Environmental Agency, and at one point each Co and Sb was found to be elevated. The saturated hydrocarbon fraction in the soils suggest an origin from terrestrial plants by the predominance of C27, C29 and C31 n-alkanes. Enrichment of PAHs were determined at sample locations near the power plant, with PAH ratios suggesting an origin both of petroleum and coal combustion. Analyses of the surface water showed sulfate concentrations well within the range reported for fresh water, with pH values indicative of neutral conditions for most samples. At one locality very high sulfate concentrations, along with a low pH value and enrichment in a number of trace elements (B, Be, Cd, Co, Li, Mn, Ni, Tl, U and Zn) were observed. It is suggested that these unusual concentrations are related to the proximity of the sample location to an abandoned coal mine. The saturated hydrocarbons determined in the water samles indicate a contribution of terrestrial plants by the predominant C27, C29 and C31 n-alkanes, whereas most PAHs where below the detection limit. Trace element concentrations in the Fern and Arrow Leave samples taken at locations of the prevailing southerly wind direction show for a number of elements (As, B, Pb, U, Zn) increasing values at sample sites near the power plant. One extraordinary high concentration of As (5248 mg kg−1) was determined in a fern sample, which also showed a relatively high Se value. It is suggested that the high As and Se concentrations are not related to emissions from the power plant, but rather reflect the proximity of the sample location to mine waste areas of the operating nearby coal mine. Enrichment of certain elements such as Zn and As found in soil and plant samples and the occurrence of some PAHs at locations near the power plant, suggest a contribution from emissions by the power plant. However, most trace element concentrations do not exceed the upper limits as indicated by the Brazilian Environmental Agency and PAH ratios suggest for many samples an origin of petroleum (incomplete fuel burning by motor vehicles) rather than coal combustion. Enrichment of trace elements and sulfate concentration in soil and water samples observed at a limited number of sample locations may be related to other anthropogenic sources such as abandoned coal mine sites and mine waste areas of operating coal mines.

27 June 2020 in Energy Exploration & Exploitation
Verified
Journal Article
Open access
PDF file
WKW Kalkreuth
W Kalkreuth
JLJ Levandowski
J Levandowski
PWP Weniger
P Weniger
BKB Krooss
B Krooss
RPR Prissang
R Prissang
ARA Lima da Rosa
A Lima da Rosa
The aim of this study was to determine the coal characteristics in the Chico-Lomã coalfield, Brazil and to evaluate the potential of natural gas associated with the coal seams (CBM), by carrying out a test well (CBM001-CL-RS) for collecting coal samples, followed by gas desorption measurements, and petrographical and chemical analyses of the coals and their methane adsorption capacities. The gas collected was analyzed for gas composition, stable carbon and hydrogen isotopes. The results indicate a cumulative coal thickness of 11.46 m in well CBM001-CL-RS, associated with an igneous intrusion of 10 m thickness. In the contact zone with the intrusion, the organic matter is severely altered with partial transformation of the coal to natural coke at distances less than 2 m from the intrusion. The ash content, based on proximate analysis, shows a variation from 29.1 to 82.8 wt.%. The sulphur content ranges from 0.43 to 3.89 wt.% and shows higher values in samples from the top of the Rio Bonito Formation. The gas desorption measurements range from 0.05 to 0.74 cm3/g, with methane being the predominant gas (>90%). A thermal origin of the gas is suggested by C and H isotopes and the C1 (methane) to C3 (propane) hydrocarbon distribution. The methane adsorption capacity of the samples varies from 2.50 to 6.50 cm3/g. Changes in microporosity related to thermal alteration may have a significant impact on the gas-holding capacity of samples located near the contact to the intrusion. For the study area, a 3D geological model was generated to estimate the volume of coal in the coalfield, followed by assessment of the gas volume associated with the coal. Based on the 3D model, a preliminary appraisal indicates resources of 7.2 billion tons of coal for the Chico-Lomã coalfield, associated with 2.7 billion m3 of gas.

1 December 1991 in Canadian Journal of Earth Sciences
Verified
Journal Article
Closed access
RHRichard S. Hyde
Richard S. Hyde
WKWolfgang D. Kalkreuth
Wolfgang D. Kalkreuth
JUJohn Utting
John Utting

25 December 2020 in Energy Exploration & Exploitation
Verified
Journal Article
Open access
PDF file
AMAgostinho Mussa
Agostinho Mussa
WKWolfgang Kalkreuth
Wolfgang Kalkreuth
AMAna Maria Pimentel Mizusaki
Ana Maria Pimentel Mizusaki
MGMarleny Blanco González
Marleny Blanco González
TSTais Freitas da Silva
Tais Freitas da Silva
MBMarcos Müller Bicca
Marcos Müller Bicca
The Parnaiba Basin is a Paleozoic to Mesozoic intraplate volcano-sedimentary basin where the Pimenteiras Formation (Devonian) is the main sequence with potential of hydrocarbon generation, mostly natural gas. The present paper evaluates the potential of hydrocarbon generation of Pimenteiras Formation based on Total Organic Carbon (TOC) and Rock-Eval pyrolysis parameters. In this work, 1077 shale samples of the Pimenteiras Formation distributed in 32 wells were evaluated. The TOC content varies between 0.1 to 4.7 wt.%, partially reflecting the accumulation and preservation rates of the organic matter in marine and coastal depositional environments controlled by regressive-transgressive cycles. The oxic and anoxic conditions vary significantly with deposition in this situation, which were evidenced by HI and OI variations through sample profiles. In the north and center of the basin, the Pimenteiras Formation has a higher potential for hydrocarbon generation relative to the south, probably due to higher anoxic conditions during deposition. The Hydrogen Index indicates the predominance of kerogen types II and III with minor occurrences of types I and IV. The Tmax values indicate general immature conditions and locally postmature, where the lowest temperatures represent the basin´s burial history, whereas the higher ones were influenced by igneous intrusions and thermogenic anomalies related to the Transbrasiliano Lineament. In addition, the excessive heat around the intrusions altered the Rock-Eval pyrolysis parameters as well as the type of organic matter, resulting in a relative increase of the kerogen types III and IV, which explains the great potential for gas generation in this basin.