In this article the kinetics of the process of sorption of copper (II) ions from aqueous solutions by polymer sulfonic cation exchanger, an elementary unit containing a heterocycle and a sulfonic group, under static conditions at a temperature of 298 K and a copper concentration of 2 mmol / mg is investigated. The sulfonic cation exchanger was preliminarily obtained by the reaction of polycondensation of diphenyl oxide and furfural with further sulfonation to obtain functional ionogenic groups in order to increase the extraction efficiency. The obtained kinetic curves of the dependence of the degree of extraction of copper ions from solution on time were processed using the Boyd, Adamson, and Myers equation, which describes diffusion in a limited volume of solution. The kinetic parameters of the sorption process (effective diffusion coefficient, etc.) are calculated, and the results obtained are compared with the data for the traditionally used industrial cation exchanger, which is a copolymer of styrene and divinyl benzene. It has been established that the process of sorption of copper (II) ions in the sulfonic cation exchanger phase is of an intra diffusion nature and corresponds to second-order kinetic equations.
1 April 2024 in Theoretical Foundations of Chemical Engineering
The synthesis of a new adsorbent based on Tebinbulok vermiculite modified with Apis mellifera chitosan for cleaning textile wastewater from indigo dye is described, and a technology for organovermiculite and modified vermiculite with hydrochloric acid is developed.
15 October 2020 in SERIES CHEMISTRY AND TECHNOLOGY
Obtained new strongly acid cation exchanger of macroporous structure based on furfural and dipheniloxide. The optimal amount of the poreformed agent and the molar ratio of the reacting substances were determined. Initially results showed that the polymer matrix using camphor as pore forming agent present a uniform surface with inter-connected pores and adding camphor into the polymer matrix could attain more abundant pores than adding n-heptane. We studied the components, surface and pore structures of the сation exchanger by Fourier transform infrared spectroscopy and scanning electron microscopy (SEM). SEM observations showed that the resin abounded in macropores as large as 7.4 to 22.6 µm both in the surface and the interior. The parameters of the porous structure of the samples are calculated using by equation BET (Brauner., at al.) and the total pore volume of ion exchangers and the radius of submicroscopic capillaries were determined. Finally dates testing prototypes under application conditions, allow us to recommend this cation exchanger for sorption of small radius ions at high speed, as fundamentals upon receipt of ion exchangers, etc.
20 March 2019 in Chemistry and Chemical Engineering
The dependence of the polarization resistance on time in salt, acidic and aqueous media of coatings based on epoxy binder filled with kaolin AKF–78, AKS–30, AKT–10 was studied. It has been established that compositions filled with kaolin of the AKT – 10 a production grade in an acidic environment — compositions filled with the kaolin of the AKF – 78 production grade possess the best protective properties against corrosion in a salt medium. The proposed compositions for protection against corrosion in saline and acidic environments
Under conditions of increasing anthropogenic pressure on aquatic ecosystems, particularly in industrially developed regions, the development of effective wastewater treatment methods is a key objective for water management. This paper presents the results of a study aimed at developing an environmentally safe technology for the purification of metallurgical wastewater from copper ions (Cu(II)) using the biosorption potential of unicellular green microalgae of the genus Chlorella. The tolerance and biosorption capacity of Chlorella vulgaris and Chlorella pyrenoidosa strains adapted to high copper concentrations were studied experimentally. A pilot technological scheme for the biological polishing of wastewater was developed and successfully tested under pilot-scale conditions at one of the largest industrial hubs in Central Asia – JSC "Almalyk Mining and Metallurgical Combine" (AGMK). The economic and environmental feasibility of applying Chlorella-based biosorption for reducing the technogenic load on water bodies and improving water resource quality in regions with developed metallurgical industries is demonstrated.