The paper reports comparative experimental and thermodynamic calculation of a Cu-In-Ni ternary system. An isothermal section of the Cu-In-Ni system at 300 ºC was extrapolated using optimized thermodynamic parameters for the constitutive binary systems from literature. Microstructural and phase composition analysis were carried out using scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDS) and X-ray powder diffraction (XRD) technique. Brinell hardness and electrical conductivity of a selected number of alloy samples with compositions along three vertical sections (Cu-In0.5Ni0.5, In-Cu0.8Ni0.2, and x(In) = 0.4) of the studied Cu-In-Ni system were experimentally determined. Based on the obtained experimental results and by using appropriate mathematical models values of hardness and electrical conductivity for the whole ternary system were predicted. A close agreement between calculations and experimental results was obtained both in case of thermodynamic, electrical conductivity and hardness predictions.
1 January 2019 in Journal of Mining and Metallurgy, Section B: Metallurgy
The article presents an experimental study of a phase diagram of a ternary Bi-Ni-Pb system using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) analysis. The investigated ternary alloys were selected from three vertical sections (x(Bi)=0.75, x(Ni)=0.1 and x(Pb)=0.9) and two isothermal sections at 100 and at 300?C. The obtained experimental results were compared with the thermodynamically extrapolated phase diagram of the Bi-Ni-Pb ternary system based on the thermodynamic parameters for the constitutive binary systems available in literature. Reasonably close agreement between the experimental data and the calculated phase diagram was obtained.
24 April 2017 in Journal of Materials Engineering and Performance