Multiferroic BiFeO 3 (BFO) thin films with a thickness larger than 400 nm are grown on solution-derived LaNiO 3 coated Si substrates via chemical solution deposition.
9 September 2015 in Journal of Materials Chemistry C
Bi2Sr3Co2Oy thin films are prepared on SrTiO3 (100), (110) and (111) single crystal substrates using the sol–gel method. All the thin films are c-axis oriented regardless of the orientation of the substrate suggesting self-assembled c-axis orientation, and X-ray photoelectron spectroscopy results give evidence of coexistence of Co3+ and Co2+ ions in the derived films. Transmission electronic microscopy observations reveal that all samples are c-axis oriented with no obvious differences for different samples, and the c-axis lattice constant is determined as ∼15 Å suggesting the misfit structure. A phenomenological thermodynamic phase diagram for self-assembled c-axis orientation is established for misfit cobaltate-based films using chemical solution deposition. All samples behave like semiconductors due to the coexistence of Co3+/Co2+ ions, and the resistivity at 350 K is ∼47, 39 and 17 mΩ cm for the thin films on SrTiO3 (100), (110) and (111), respectively, whereas the Seebeck coefficient at 300 K is 97, 89 and 77 μV K−1. The successful attainment of Bi2Sr3Co2Oy thin films with self-assembled c-axis orientation will provide an effective prototype for investigation of growth mechanisms in complex oxide thin films with a misfit structure.
Inserting multiple quantum wells (MQWs) into a p–n junction, III-nitride MQW diodes can separately function as a light transmitter, modulator, and receiver under different bias conditions. Owing to the spectral overlap between the emission and responsivity spectra, the emitted light from the transmitter is able to be modulated and detected by the modulator and receiver, which have identical MQW structures. Here, we develop a compatible fabrication process to monolithically integrate an III-nitride light transmitter, waveguides, Y-splitter, modulators, Y-combiner, and receiver into a tiny chip. An on-chip 405 nm light communication system is established and exhibits a transmission rate of 260 Mbps in the non-return-to-zero on-off keying scheme. The results pave a feasible route to develop sophisticated monolithic photonic circuit on an III-nitride-on-silicon platform.