Fangxin Chen

Fangxin Chen

Auto-generated profile, based on publicly available information

Fangxin Chen

Southwest Jiaotong University, Chengdu, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 November 2020 in IEEE Access
Verified
Journal Article
Open access
FCFangxin Chen
Fangxin Chen
QZQianjun Zhang
Qianjun Zhang
YGYongzhuo Gao
Yongzhuo Gao
WDWei Dong
Wei Dong
Multifarious flexure-based displacement amplifiers have been proposed and studied in the past decades, showing importance in many industrial fields, such as bioengineering, optical instruments, and semiconductor technology. Displacement amplifiers provide precise motion and large stroke through a simple and low-cost way compared with other piezoelectric actuators. Those merits have opened a door for new and advanced micro devices with unprecedented performance. This paper aims to proffer a comprehensive review on the design, modeling, characteristics, and applications of flexure-based displacement amplifiers, following by pointing out the inherent drawbacks in this research area such as amplification ratio limit, parasitic motion, low lateral stiffness, low natural frequency, and discussing existing solutions and some potential research directions in those topics. Finally, a summary is concluded and the future development perspectives of the displacement amplifiers are discussed. This review contributes to giving a comprehensive understanding of the displacement amplifier, which provides guidance on designing new displacement amplifiers for improving their mechanical output performance. It is also expected to be instrumental for related researchers to understand displacement amplifiers, and to successfully select and design for specific applications.

27 October 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
FCFangxin Chen
Fangxin Chen
YGYongzhuo Gao
Yongzhuo Gao
WDWei Dong
Wei Dong
ZDZhijiang Du
Zhijiang Du
This article presents the design, control, and test of a piezo-based passive compliant micro-gripper capable of combining position and force control. The gripper's structure is compact due to a super-large amplification ratio of 52 that is achieved by a two-stage displacement amplifier. The position/force switching control strategy is utilized for the position and force regulation. Particularly, a dual feedforward controller combining Gaussian process regression based hysteresis compensator and input shape technique based vibration suppressor is employed to the position regulation, while a hybrid controller composed of dual feedforward and PID feedback is used for the precision force control. Compared to the conventional design, the system is simplified because displacement sensor is removed. In order to protect the micro-object from contact, the passive compliance design method is introduced to the gripper tip. An experimental study, executing grasp-hold-release operations of a gold wire, is carried out to validate the feasibility of the gripper system. The result confirms that the proposed scheme is feasible and the stable clamping operations can be achieved.

20 September 2019 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
FCFangxin Chen
Fangxin Chen
WDWei Dong
Wei Dong
MYMiao Yang
Miao Yang
LSLining Sun
Lining Sun
ZDZhijiang Du
Zhijiang Du
Due to limitations in the fabrication technology, the large aperture space optical mirror is always spliced into several small segments rather than fabricated monolithically. To guarantee the imaging quality of the system, each segment needs to be aligned at micron-level precision with millimeter-level range. For this purpose, a PZT actuated 6-axis high-precision positioning system, which consists of three serially connected parallel mechanisms is proposed in this paper. Compared with previous 6-DOF positioning solutions such as a Stewart platform, the proposed design features relatively compact structure and straightforward kinematics. To realize long stroke and fine resolution simultaneously, bridge-type amplifiers are employed to enhance the stroke of the PZT actuation and the flexure hinges are utilized to eliminate friction and backlash. The performance of the amplifier under two kinds of external loads are analyzed so that the amplifiers could be designed according to the application conditions. Furthermore, it can be found that the displacement sensors must be employed at the output end of the actuation module to eliminate the input coupling which commonly exists in the compliant mechanisms. The feasibility of the design is validated by finite element analysis (FEA) and experiment study. The maximum stroke is 2.1mm in Z-axis, and the finest resolution is 0.5μm in X- and Y- axes.

29 May 2018 in Materials
Verified
Journal Article
Open access
PDF file
BZBo Zhang
Bo Zhang
FCFangxin Chen
Fangxin Chen
HLHaiyang Li
Haiyang Li
ZDZhijiang Du
Zhijiang Du
LSLining Sun
Lining Sun
WDWei Dong
Wei Dong
A friction–inertial-based rotary motor driven by shear piezoelectric actuators (SPAs) is proposed in this paper, which possesses many superior features, including high resolution, compact size, large load-capacity, and low cost. In order to eliminate the step loss and increase the step size when an external load is applied, the power-function-shape driving signal was used to actuate the rotary motor. According to the step characteristics under this driving signal, two motion modes were observed and defined, namely the stick-shoot motion mode and the stick-slip-shoot motion mode. The former motion mode can realize a large step size while the later one cannot due to the slipping during the rising phase. After analyzing the results from the numerical simulation and the experiment study, it was found that the motion performance of the motor is closely related to the preload and the base number of the driving signal rather than the size of SPAs, which means the motor can be further downsized according to its actual requirements.

6 March 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
FCFangxin Chen
Fangxin Chen
HYHong Yao
Hong Yao
JWJunjie Wei
Junjie Wei
SZShuo Zhan
Shuo Zhan
BHBi Hai
Bi Hai
Piezomotors have been widely used for motion generation with long stroke and fine resolution, where stick-slip mode features a high motion velocity but a low load capacity, inchworm mode has a high load capacity but a low motion velocity, and scan mode is able to realize superhigh resolution but less travel range. Combining these motion modes to achieve a well-rounded piezomotor is challengeable but significant. In this article, a piezomotor with multiple motion modes is proposed. A compliant mechanism with a parallelogram mechanism and lever-type amplifiers is designed to realize various motion modes and adjust the contact force, which has a significant impact on motion performance. To prevent the backward motion and slippage during motion, two power-function based driving signals are designed and analyzed for stick-slip mode and inchworm mode, respectively. A prototype of the designed piezomotor was fabricated to validate the feasibility. According to the experiment results, the maximum motion velocity is 3.24 mm/s, the load capacity is 7.85 N, and the most fine displacement resolution is 10 nm. The proposed methodology is applicable to other types of multimode piezomotors.

27 June 2018 in Sensors
Verified
Journal Article
Open access
PDF file
BZBo Zhang
Bo Zhang
FCFangxin Chen
Fangxin Chen
MYMiao Yang
Miao Yang
LHLinxiang Huang
Linxiang Huang
ZDZhijiang Du
Zhijiang Du
WDWei Dong
Wei Dong
As one of the major methods for the diagnosis and treatment of cancers in their early stages, the percutaneous puncture technique has bright prospect in biopsy, ablation, proximity radiotherapy, and drug delivery. Recent years, researchers found the flexible needle cannot realize feedback control during the puncture surgeries only by path planning. To solve this problem, the flexible needle is tried to achieve real-time detection in this paper. Compared with previous methods, the strain gauges glued on the needle surface rather than the medical imaging techniques is used to collect the information to reconstruct the needle curve, which is benefit to integrate the whole system and obtain a more simple and accurate closed-loop control. This paper presented the math model of curve fitting and analyzed the causes of curve fitting errors. To verify the feasibility of this method, an experiment setup was built. Results from the experiments validated the solution in this paper to be effective.