Centre for Cooperative Research on Alternative Energies (CIC energiGUNE), Basque Research and Technology Alliance (BRTA), Alava Technology Park, 01510 Vitoria-Gasteiz, Spain
Auto-generated profile, based on publicly available information
Tandra Panja
Centre for Cooperative Research on Alternative Energies (CIC energiGUNE), Basque Research and Technology Alliance (BRTA), Alava Technology Park, 01510 Vitoria-Gasteiz, Spain
Cubic ordered mesoporous carbon co-doped with N and P shows a high specific capacitance of 210 F g−1 at 1.0 A g−1 and excellent retention of specific capacitance with more than 90% of initial capacitance at a high current density of 10 A g−1 and also for 3000 charge–discharge cycles.
8 March 2017 in ACS Applied Materials & Interfaces
Most lithium-ion capacitor (LIC) devices include graphite or non-porous hard carbon as negative electrode often failing when demanding high energy at high power densities. Herein, we introduce a new LIC formed by the assembly of polymer derived hollow carbon spheres (HCS) and a superactivated carbon (AC), as negative and positive electrodes, respectively. The hollow microstructure of HCS and the ultra large specific surface area of AC maximize lithium insertion/diffusion and ions adsorption in each of the electrodes, leading to individual remarkable capacity values and rate performances. To optimize the performance of the LIC not only in terms of energy and power densities but also from a stability point of view, a rigorous mass balance study is also performed. Optimized LIC, using a 2:1 negative to positive electrode mass ratio, shows very good reversibility within the operative voltage region of 1.5–4.2 V and it is able to deliver a specific cell capacity of 28 mA h−1 even at a high current density of 10 A g−1. This leads to an energy density of 68 W h kg−1 at an extreme power density of 30 kW kg−1. Moreover, this LIC device shows an outstanding cyclability, retaining more than 92% of the initial capacity after 35,000 charge–discharge cycles.
Due to the dual advantage of capacitive and faradaic charge storage mechanisms, Li-ion capacitors (LICs) are regarded as a promising energy storage technology for many high-power applications. However, high cost and intricacy of indispensable pre-lithiation step in LIC fabrication are the major stumbling block against its widespread commercial interest. In this regard, operando pre-lithiation through incorporating lithium containing sacrificial salt in the positive electrode holds high potential to solve this issue. Herein, we present an industrially compatible fabrication method based on a solution processable positive electrode consisting of an activated carbon mixed with a low-cost, air-stable dilithium squarate as sacrificial salt. Through careful optimization of electrode design, laboratory scale cells are upscaled to pouch cell prototypes. Fabricated LIC pouch cells deliver high specific energy (i.e. max. 58 Wh kg −1AM ) and power (i.e. max. 8190 W kg −1AM ) with respect to active electrode mass. Moreover, cycle life and floating tests performed at room temperature show capacitance retention of 83% after 80000 charge-discharge cycles and 100% retention after 1000 floating hours at 3.8 V. However, the accelerated aging tests at 70 °C induce fast device failure. Post-mortem analyses reveal different ageing mechanisms for cycled and floated LIC pouch cells.