Among the biggest challenges battery electric vehicles (BEVs) face is their limited range and higher price compared to conventionally powered vehicles. One underlying reason is the operation strategy of the battery pack. To reduce aging and avoid deep discharge, state of the art battery management employs strict and conservative operational limits, leaving a significant amount of energy in the battery unused, directly translating into a loss of possible range. Additionally, this strategy leads to a sudden and, for the driver unpredictable, power derating at a low state-of-charge (SOC). This paper proposes an approach for defining the operational limits of the vehicle's battery and a strategy for using most of the available capacity and power at a low SOC, increasing the vehicle's capabilities with no additional hardware. The benefits of this approach are shown by a theoretical assessment of selected BEVs. The limitations of current implementations are analyzed by an experimental study of a Volkswagen e-Golf on a chassis dynamometer and under real driving conditions. The impact of an extension of the battery's operational limits is discussed with a study of relevant literature and supported by measurements of lithium-ion battery behavior. The strategies presented in this paper are implemented, simulated and evaluated under consideration of the behavior of a single cell within the battery pack, as well as the whole electric drivetrain.
Common lithium-ion battery cells consist of a cathode material, such as a Nickel-Manganese-Cobalt NMC and a graphite anode. Expansion of the graphite anode due to lithium intercalation while charging leads to macroscopic expansion of the entire cell, which is directly related to the state-of-charge. Therefore, conventional rigid-battery-module bracing causes pressure forces to build up periodically in the cell stack due to charging and discharging steps. In homogeneous cell stacks, the measured-pressure curve is a multiple of a single cell's measured pressure force curve. One cell, perhaps prematurely aged (i.e. diverging state-of-health), disturbs the module-pressure force curve. Due to the mechanical coupling of the cells in a module, a single sensor can monitor this.