16 April 2013 in ACS Applied Materials & Interfaces
29 June 2019 in Journal of Polymer Science Part B: Polymer Physics
17 January 2018 in Macromolecular Rapid Communications
3 September 2018 in Macromolecular Chemistry and Physics
7 September 2024 in Journal of Applied Polymer Science
RJRobert David Ludwig Jerusalem
Robert David Ludwig Jerusalem
Shape memory polymers typically utilize the glass transition or melting temperature to switch from one shape to another. The goal of this work is to check if the α‐relaxation, which is attributed to the migration of chains through lamellar crystals, can be utilized as novel switch for any crosslinkable semi‐crystalline thermoplastic. Using cross‐linked low‐density polyethylene (x‐LDPE) as an example, it is shown that the α‐relaxation is indeed suitable as switch, when the polymer is crystallized under strain to an intermediate shape. It is demonstrated that post‐stretching at a temperature between the α‐relaxation and the melting temperature, followed by subsequent cooling to room‐temperature switches x‐LDPE from the intermediate to a temporary shape and that reheating to this temperature initiates the retraction back to the intermediate shape. Switching between intermediate and temporary shapes is shown to be accompanied by a reversible change in morphology.
12 April 2024 in Macromolecular Chemistry and Physics
Cross‐linking of polymers is an efficient method to tailor the end‐use properties of polymer materials. Cross‐linking using a chemical agent, e.g., dicumyl peroxide (DCP), allows for a spatially uniform network formation in the melt state. In addition, it is also associated with side reactions which influence the final properties of the plastic part. This work investigates the influence of DCP concentration on the tribological properties of a cross‐linked low‐density polyethylene (LDPE) grade. In particular, high DCP concentrations up to 20 phr are chosen in order to explore the effect of a high degree of cross‐linking. The viscoelastic properties below and above the melting temperature are studied in detail to support the interpretation of the tribological results. Rheological investigations allow one to monitor the cross‐linking of the long‐chain branched LDPE. The data and the subsequent optical analysis show that wear already is significantly reduced at a low DCP concentration of 1 phr because of the covalent bonds caused by cross‐linking. A high DCP concentration of 20 phr yields an increase of coefficient of friction which can be explained by the low stiffness and the resulting high contact area in the case of highly cross‐linked LDPE.