In this paper, a novel SiC superjunction metal-oxide-semiconductor field-effect transistor (MOSFET) with integrated MOS junction barrier Schottky diode (MJBS) is proposed, in which the n-pillar is directly connected to the source electrode to form a Schottky contact at the top, and a part of polycrystalline silicon is connected to the source electrode by inserting an oxide layer in the centre of the trench gate to form a split gate and a body diode is in the on state to form a MOS channel electron accumulation layer, electrons can easily flow from the n-pillar into the source contact, and the turn-on voltage Vth is reduced by 61. 3% compared to a superjunction MOSFET that only forms a Schottky contact, which further reduces the static loss of the built-in diode when it conducts. The conduction of the Schottky diode during reverse recovery is enhanced. As a result, the hole injection efficiency of the body diode can be reduced, thereby lowering the reverse recovery charge (Qrr) and further suppressing reverse recovery oscillations. Compared with the parasitic body diode, the unipolar conduction generated by the channel diode effectively optimises the reverse recovery performance and switching characteristics, and the simulation results show that the reverse recovery charge (Qrr) and peak reverse recovery current (Irrm) of the proposed SJ MOSFETs are reduced by about 74.9% and 69.7%, respectively, and the total switching energy loss ESW is reduced by 73.6%.
A trench termination with anode electrode extension structure for β-Ga2O3 diode was designed and simulation studied. The simulation employed Sentaurus TCAD simulator. The influences of device's geometric parameters on the device's breakdown characteristics has been investigated. These geometric parameters include termination trench depth, anode electrode extension length, trench termination oxide layer thickness, and trench termination width. Optimization results was provided. The simulation results revealed an 88% increase in breakdown voltage for the optimized termination compared to the structure without terminations. Additionally, the termination efficiency approached almost 100%. Under the simulation condition, a 10μm increase in the trench termination width resulted in a 20% decrease in leakage current. All these results will provide valuable references for further research on β-Ga2O3 trench barrier termination.
In view of the current situation that the muzzle tightening device can only tighten the muzzle of a single projectile, a flexible muzzle tightening device is developed, which is suitable for pressing various small-caliber projectiles and cartridges. With the flexibility, high precision and safety automation of the muzzle tightening process of small-caliber projectiles as the main research objectives, the mechanical device, electrical automatic control system and safety protection are designed. The experimental results show that the muzzle tightening device is advanced in design, has an accuracy of 0.06mm, realizes man-machine isolation, and is safe and reliable on the whole. The device designed in this paper improves the research efficiency of various physical properties of various types of small caliber shells.