12 December 2013 in World Journal of Microbiology and Biotechnology
12 November 2022 in Building and Environment
1 January 2013 in Science of The Total Environment
12 March 2012 in Letters in Applied Microbiology
Aims: The purpose of this study was to evaluate the effects of environmental conditions and material type on persistence and inactivation of Brucella suis. Methods and Results: Brucella suis (approx. 1 × 108 CFU) was spiked onto surfaces (glass, aluminium and wood) by liquid inoculation. Persistence was evaluated over 56 days at 22 ± 2°C, 40 ± 15% r.h. and 5 ± 3°C, 30 ± 15% r.h. In addition, three readily available decontaminants (pH-adjusted bleach, 70% ethanol and 1% citric acid) were evaluated for their effectiveness at inactivating Br. suis on these materials. Decontaminations were conducted following 0 and 28 days exposure to the two conditions. Results indicated that Br. suis can persist on environmental surfaces for at least 56 days. Persistence was highest at low temperature. Decontamination was most challenging on wood with all three decontaminants. Conclusions: Following a Br. suis contamination incident, passive decontamination (through attenuation) may not be feasible, as this organism can persist for months. In addition, the results suggest that some sporicidal decontaminants may be ineffective on materials such as wood, even for vegetative biological agents such as Br. suis. Significance and Impact of Study: This study aids incident commanders and remediation experts to make informed decisions regarding decontamination after a biological contamination incident.
3 December 2014 in PLOS ONE
A series of experiments was conducted to explore the utility of composite-based collection of surface samples for the detection of a Bacillus anthracis surrogate using cellulose sponge samplers on a nonporous stainless steel surface. Two composite-based collection approaches were evaluated over a surface area of 3716 cm2 (four separate 929 cm2 areas), larger than the 645 cm2 prescribed by the standard Centers for Disease Control (CDC) and Prevention cellulose sponge sampling protocol for use on nonporous surfaces. The CDC method was also compared to a modified protocol where only one surface of the sponge sampler was used for each of the four areas composited. Differences in collection efficiency compared to positive controls and the potential for contaminant transfer for each protocol were assessed. The impact of the loss of wetting buffer from the sponge sampler onto additional surface areas sampled was evaluated. Statistical tests of the results using ANOVA indicate that the collection of composite samples using the modified sampling protocol is comparable to the collection of composite samples using the standard CDC protocol (p = 0.261). Most of the surface-bound spores are collected on the first sampling pass, suggesting that multiple passes with the sponge sampler over the same surface may be unnecessary. The effect of moisture loss from the sponge sampler on collection efficiency was not significant (p = 0.720) for both methods. Contaminant transfer occurs with both sampling protocols, but the magnitude of transfer is significantly greater when using the standard protocol than when the modified protocol is used (p<0.001). The results of this study suggest that composite surface sampling, by either method presented here, could successfully be used to increase the surface area sampled per sponge sampler, resulting in reduced sampling times in the field and decreased laboratory processing cost and turn-around times.
29 August 2016 in Journal of Applied Microbiology