Hydrogen effect on fatigue performance at relatively high values of stress intensity factor range, ΔK, of pure BCC iron has been studied with a combination of various electron microscopy techniques. Hydrogen-assisted fatigue crack growth rate is manifested by a change of fracture features at the fracture surface from ductile transgranular in air to quasi-cleavage in hydrogen gas. Grain reference orientation deviation (GROD) analysis has shown a dramatic suppression of plastic deformation around the crack wake in samples fatigued in hydrogen. These results were verified by preparing site-specific specimens from different fracture features by using Focused Ion Beam (FIB) technique and observing them with Transmission Electron Microscope (TEM). The FIB lamella taken from the sample fatigued in air was decorated with dislocation cell structure indicating high amount of plasticity, while the lamella taken from the quasi-cleavage surface of the sample fatigued in hydrogen revealed a distribution of dislocation tangles which corresponds to smaller plastic strain amplitude involved at the point of fracture. These results show that a combination of critical hydrogen concentration and critical stress during fatigue crack growth at high ΔK values triggers cleavage-like fracture due to reduction of cohesive force between matrix atoms.
1 January 2018 in The Proceedings of Conference of Kyushu Branch
For the storage and transportation of compressed gaseous hydrogen in forthcoming hydrogen energy-based society, hydrogen-assisted fatigue crack growth (HAFCG) in structural steels is one of the most considerable problems from the perspective of life-cycle assessment or safety use of the hydrogen-containing components. In this study, fatigue crack growth tests of a commercially pure iron were conducted in laboratory air and 0.7 MPa gaseous hydrogen at room temperature, in order to elucidate the fundamental mechanism dominating the crack growth acceleration in steels with BCC lattice structure. The tests revealed dramatically accelerated crack growth rate in presence of hydrogen in association with significant change of fracture morphology (ductile striations to quasi-cleavage). The mid-thickness fracture paths in air and hydrogen were analyzed by using several characterization techniques including electron-backscattered diffraction (EBSD), electron channeling contrast imaging (ECCI), and transmission electron microscopy (TEM), achieving critical and direct evidence indicating that hydrogen dramatically suppressed the evolution of dislocation structure beneath the fracture surface and enhanced the fracture along {100} plane . These results implicate that the cause of HAFCG in BCC steels is the hydrogen-induced reduction of the interatomic cohesive force, leading to the fracture along cleavage plane, in addition to the localization of plasticity into the crack tip region as was reported in previous research.