1 October 2021 in Energy and Buildings
1 December 2021 in Energy and Buildings
10 April 2007 in Structural Survey
Purpose – This paper sets out to look at the different types of crawl spaces that are found in Sweden and why they are still being used in today's constructions despite the advice of building experts to avoid their use. Design/methodology/approach – Literature reviews were performed to look at the types of crawl space foundations available as well as the advantages and disadvantages of each type and to look at the economic costs associated with repairing a damaged home that could be attributed to a crawl space foundation. Interviews were conducted with engineers with regard to moisture design issues in the Swedish building industry. Findings – This study shows that there are five traditional types of crawl spaces used in Sweden: plinth, outdoor ventilated, indoor ventilated, unventilated, and suspended crawl space foundations, four of which are currently available to builders. Despite all of the available knowledge regarding the disadvantages and the past performance of the outdoor ventilated crawl spaces, companies in Sweden are still using this design and are still experiencing expensive problems. Research limitations/implications – This paper is limited to Sweden. The situation in other countries was not specifically examined; however, it appears that other countries are also facing the same problems and this paper may provide some insight into why. Originality/value – This study shows that there are many ways to construct a crawl space, some of which are considerably less risky than others. The study also indicates that the building industry in general seems to lack the theoretical background or incentive to utilize these variations properly or completely move away from these designs.
1 October 2017 in Energy Procedia
Building regulations in Sweden require that an energy calculation is done for every building to show that the building design meets the maximum specific energy use as outlined in the Swedish Building Code. The result of this energy calculation is always one number, for example a building might use 89 kWh/m2 year when the building regulation requires 90 kWh/m2 year. This level of reporting can lead to conflicts if the measured energy use is over the calculated energy use. With the current tools you need to do a time-consuming parametric study in order to see which risks are associated to the design and material properties.This paper is part of a project called “Calculation method for probabilistic energy use in buildings” and is developing and testing the application of Monte Carlo simulations using two popular energy calculation tools developed in Sweden. The goals of the project are; to look at which input parameters have the largest influence on the result; to begin defining a realistic spread of the most significant parameters; to study the advantages and disadvantages of probabilistic energy calculations; and to look at the discrepancies between calculated and measured energy use.This paper presents the results of the first stage of the study defining which input parameters should vary and defining a realistic spread of the values of these parameters. Out of all the input parameters in the case object, it was determined that the method should be tested with 16 parameters with variable values. This paper also presents the preliminary results of an energy calculation done on a real object using the variable parameters and 1000 iterations compared to the base calculation without Monte Carlo simulations