The coalescence of hydroxide layers is diminished by hydraulic shear forces, leading to the even distribution of LDH nuclei, which promote the growth of individual crystals along the horizontal plane and result in nanosheet particles.
The innovative hollow silica nanoparticle (HSN) material possesses substantial potential for application in the insulation field. The size and shell thickness of HSN are crucial factors in determining their inherent properties, which, in turn, impact their applicability. This research presents a facile approach to synthesizing HSN in which sodium silicate (Na2SiO3) was utilized as the silica precursor that can be directly deposited onto layered double hydroxide (LDH) nanoparticles without the utilization of any surfactant. A subsequent acid treatment was used to eliminate the templates, resulting in the formation of an HSN devoid of mesopores in silica shells. By utilizing various sizes of LDH cores, obtainable via coprecipitation followed by hydrothermal treatment, we were capable of successfully synthesizing the hollow particles with adjustable diameters ranging from 50 to 200 nm. In addition, the shell thickness is varied from 6.8 to 22.5 nm by varying the silicate solution concentration. Results demonstrate that prepared HSNs have low thermal conductivity and high reflectance in the UV-vis-NIR range (averaging 82.1%). These findings suggest that HSN can be utilized as an effective inorganic filler in the formulation of reflective and thermally insulating coatings.
In this contribution, crystallization was performed to assess the kinetics of nucleation and crystal growth of L-lactide. In most common solvents, this compound shows very high solubility even at low temperatures, which could be challenging for crystallization process design. In the first part of this paper, the anti-solvent effects of n-hexane on solutions of L-lactide in tetrahydrofuran (THF) were investigated through studying the influence of solvent compositions on the solubility. Thanks to these effects, the solubility of the interested compound can be adjusted to desired degrees of supersaturation by adding suitable amounts of the anti-solvent. In the second part, a solvent composition at a mass ratio of 45/55 (n-hexane/THF) was chosen, and an isothermal seeded crystallization process was implemented. The evolution of the particle sizes and changes in the solute concentration profile of this process were monitored. Based on the obtained data, a widely used model, i.e., the population balance equation (PBE), was then utilized to model the crystal size distribution (CSD). Reasonable assumptions were made to reduce the mathematical complexity of the PBE. In the simplified model, only crystal growth and secondary nucleation were considered for model formulation, with assumptions of the size-independent growth rate and negligible size of nuclei. The kinetic parameters were estimated by using the seed and final-time crystal density functions in combination with variations in the concentration of the mother liquor. Indeed, the numerical solution for the one-dimensional problem of the L-lactide crystallization based on the estimated parameters gained a relatively good agreement with the determined CSD. Furthermore, the obtained model also correlated well with the variations in the solute concentration of the mother liquor. In short, this simple approach can be used for predicting the productivity and CSD of the L-lactide crystallization.
This study explores a novel approach for addressing acute lipid disorders using a double nanoemulsion system (NCMs) loading Cordyceps militaris extract.
Sericin (SS) serves as a natural adhesive, binding silk fibers within the silkworm cocoon and shielding them from environmental stresses. Commonly, SS-based films rely on additives to improve their physical properties. In this study, we developed an additive-free film composed of SS and chitosan (CS) in an ethanol environment, achieving enhanced tensile strength, elongation at break, and water retention and release capacity through structural modification of SS. The physicochemical properties of the film were comprehensively characterized using FTIR, SEM, and contact angle analyses. Additionally, its antioxidant, antibacterial, and hemocompatibility properties were systematically evaluated, demonstrating its potential for diverse biomedical and environmental applications. Results demonstrated that a film with a SS-to-CS ratio of 2 : 1 exhibited strong DPPH and hydrogen peroxide scavenging activities, induced only 2.07% hemolysis, and displayed moderate antibacterial effects against both Gram-negative (Escherichia coli, Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus, Bacillus subtilis) bacteria. Biocompatibility and safe use of the SS/CS film were tested on rabbit and human red blood cells. Furthermore, the film was applied for postharvest preservation of fruits, extending the shelf life of bananas up to 8 days and maintaining the freshness of tomatoes for up to 40 days compared to 12 days for untreated samples. These findings highlight the potential of SS/CS films for sustainable agricultural product preservation.