Switching light on-chip: The development of practical, reconfigurable photonics requires a platform that can be scaled to large circuits and driven by low-voltage complementary metal-oxide semiconductor (CMOS) electronics. Such a platform requires that switching devices possess a compact footprint, low driving voltages, fast switching, low optical losses, and low power consumption. Haffner et al. demonstrate that the combination of opto-electro-mechanical effects with plasmonic devices can provide a platform that meets all the above criteria. The results are promising for developing on-chip integrated optical networks that can be switched by CMOS-level voltages. Science , this issue p. 860
The Pockels effect is essential for controlling optical signals at the highest speeds, particularly for electro-optic modulators in photonic integrated circuits. Lithium niobate (LN) and barium titanate (BTO) are two excellent Pockels materials to this end. Here we measure the Pockels coefficients and permittivity in LN and BTO over a continuous frequency range from 100 MHz to 330 GHz. These properties are constant across this frequency range in LN, but have a strong frequency dependence in BTO. Still, our measurements show that BTO has remarkable electro-optic properties compared with LN. Furthermore, we show how BTO devices can be designed with a flat electro-optic frequency response despite the Pockels coefficient dispersion. Finally, we expound our method for broadband characterization of these vital electro-optic properties, utilizing specialized integrated electro-optic phase shifters. Altogether, this work empowers the design of high-speed BTO devices and the development of new electro-optic materials.
The electro-optic coefficient (Pockels coefficient) is largest around the absorption resonance of a material. Here, we show that the overall losses, the power consumption and the footprint of plasmonic electro-optic modulators can be reduced when a device is operated in the vicinity of absorption resonances of an electro-optical material. This near-resonant operation in plasmonics is contrary to what is known from photonics where off-resonant operation is required to minimize the overall losses. The findings are supported by experiments demonstrating a reduction in voltage-length product by a factor of 3 and a reduction in loss by a factor 2 when operating a plasmonic modulator near resonance compared to off-resonant.
Electromagnetic fields at terahertz frequencies open a window to multiple applications, such as wireless communication, sensing, and medical imaging. Yet the challenge remains to efficiently generate, receive and process such high frequencies. In this work, we investigate plasmonic modulators to bring THz frequencies to photonic integrated circuits (PICs). We demonstrate a frequency response beyond the 1 THz and develop an equivalent circuit model of the modulator. Our results show that plasmonic modulators are uniquely suited for THz PICs.
Electro-optic modulators are key elements in high-speed optical telecommunication links and preferably rely on materials with a linear electro-optic effect. Choosing adequate waveguide geometries is a key challenge in the design of electro-optic modulators. While all-dielectric geometries promise high-speed modulation with low propagation loss, their modulation efficiency suffers from low confinement and weak electrical fields, resulting in lengthy devices. Plasmonic geometries, on the other hand, allow for most compact devices featuring highest electro-optical bandwidths, but at the cost of higher losses. Alternatively, hybrid photonic–plasmonic solutions open a sweet spot for high-speed modulators with moderate loss. In this review, we discuss the three waveguide types by analyzing and comparing their performance and their sensitivity to variations in geometry with respect to a choice of the electro-optical Pockels-effect material.