1 February 2026 in Physics of Fluids
Through the integration of ion-selective interfaces into microchannels, micro–nanofluidic systems can realize diverse macroscale functions such as seawater desalination, lithium-magnesium separation, and trace particle enrichment based on ion concentration polarization (ICP). Although ion transport and electrokinetic flow in membrane-embedded microchannels have been extensively studied, the effects of dissociation reactions on spatial variations of pH and electroconvection remain unclear. This study investigates the electrokinetic transport characteristics coupled with dissociation equilibria, including electroosmotic flow, desalination, ion enrichment, and overall pH distribution within the microchannel. The results show that the buffer reactions maintain the ionic balance of the system when high-mobility ions accumulate near the membrane and, by generating co-ions for charge compensation, limit the enrichment of a single ion species so that its concentration remains below the electroneutrality limit. The acid dissociation reaction is significantly accelerated in the Ohmic and limiting current (LC) regimes due to ion enrichment, resulting in a maximum increase of approximately 7.8% in flow velocity. The coupling between the dissociation reactions and the electroosmotic pumping effect extends the pH disturbance from the local region to the entire channel. In strong electrolytes, the upstream pH rises to approximately 8.3, whereas in weak electrolytes, an overall acidification occurs, with the pH decreasing to approximately 6.1. These findings provide theoretical guidance for optimizing desalination efficiency, manipulating electroosmotic pumping, and enriching pH-sensitive particles in microfluidic systems.
1 March 2026 in Physics of Fluids
High-viscosity biological fluids are widely employed in medical diagnostics and drug delivery, and understanding their microscale mixing behavior is essential for achieving high process efficiency. Previous studies have confirmed the feasibility of mixing high-viscosity fluids in symmetric Tesla micromixers. Compared with symmetric configurations, the asymmetric Tesla design induces stronger flow perturbations and more complex vortical structures, while its performance in handling high-viscosity biological fluids remains insufficiently characterized. In this work, the mixing characteristics of two high-viscosity fluids in an asymmetric Tesla valve micromixer are investigated through a combination of numerical simulations and experimental validation. The results show that as the number of Tesla valves increases, the frequency of flow disturbances rises at the curved sections and the junctions between adjacent units, thereby enhancing the mixing efficiency. The mixing efficiency increases with flow velocity and gradually approaches saturation when the Reynolds number (Re) exceeds 200, reaching a value of approximately 0.88. When the Schmidt number (Sc) exceeds 1000, the mixing process within the channel becomes primarily governed by convective transport, and further enhancement of mixing efficiency therefore requires higher flow rates. In the studied configuration, an increase in the valve angle results in a longer curved flow path within each unit and a shorter overall channel length, thereby enhancing the formation of stronger secondary vortices and simultaneously reducing the pressure drop. At a valve angle of 60°, the Tesla valve attains a mixing efficiency of 0.91 at Re = 300, with a pressure drop reduced by 5.33 × 109 Pa compared to the 30° configuration. These findings provide valuable insights into the design of asymmetric Tesla for efficient mixing of high-viscosity biological fluids.
3 September 2026 in International Journal for Numerical Methods in Biomedical Engineering