1 January 2023 in Mining informational and analytical bulletin
1 January 2022 in Mining informational and analytical bulletin
28 December 2018 in Gornyi Zhurnal
In the course of construction of new lines in the Saint-Petersburg Metro, builders are faced with the known difficulties. The metro stations and tunnels are constructed in Cambrian argillite-like clays with interbeds of sandstone and limestone, with competent boulder stones and other inclusions sometimes. In these cases, in order to avoid damage of cutter bits and to ensure normal duty, a machine operator should assess cutting forces. Monitoring of the cutting forces on rock-breaking tools is carried out using cleavers designed by this study’s authors. The article considers a cutting range of the cutterhead of shield machine KT1–5.6M and presents dependences of the total torque, hardness of rocks and thickness of chips. The algorithm is developed for localization of solid inclusions based on the readings of a cutter bit or a cleaver which record jumps in hardness of rocks.
1 March 2018 in IOP Conference Series: Materials Science and Engineering
The actual problem of extracting minerals from the bottom of the world ocean is considered. On the ocean floor, three types of minerals are of interest: iron-manganese concretions (IMC), cobalt-manganese crusts (CMC) and sulphides. The analysis of known designs of machines and complexes for the extraction of IMC is performed. These machines are based on the principle of excavating the bottom surface; however such methods do not always correspond to "gentle" methods of mining. The ecological purity of such mining methods does not meet the necessary requirements. Such machines require the transmission of high electric power through the water column, which in some cases is a significant challenge. The authors analyzed the options of transportation of the extracted mineral from the bottom. The paper describes the design of machines that collect IMC by the method of vacuum suction. In this method, the gripping plates or drums are provided with cavities in which a vacuum is created and individual IMC are attracted to the devices by a pressure drop. The work of such machines can be called "gentle" processing technology of the bottom areas. Their environmental impact is significantly lower than mechanical devices that carry out the raking of IMC. The parameters of the device for lifting the IMC collected on the bottom are calculated. With the use of Kevlar ropes of serial production up to 0.06 meters in diameter, with a cycle time of up to 2 hours and a lifting speed of up to 3 meters per second, a productivity of about 400,000 tons per year can be realized for IMC. The development of machines based on the calculated parameters and approbation of their designs will create a unique complex for the extraction of minerals at oceanic deposits.
1 January 2021 in Mining informational and analytical bulletin
30 April 2019 in Obogashchenie Rud
The article discusses oversize reduction in the operation of crushers, in handling of frozen rocks on receiving hopper grizzly grates at metallurgical enterprises and processing plants, when crushing large metallurgical castings, and in a number of other applications. Within the framework of the problem, a hammer drill design is presented, enabling operation in the impact and impact-rotation modes, which significantly increases the scope of application of the presented oversize reduction device actuator. The design of the oversize reduction actuator is considered, including a double hammer drill installed on a handling unit chassis. The article presents the results of experimental studies to identify the main parameters of the proposed hammer actuator and describes the dependencies for the peak penetration value at different cutting edge angles for the rock being cut by establishing the dependence in the power form as a function of its energy and impact frequency. A formula is proposed for calculating the theoretical performance of the hammer drill, taking into account the impact frequency and the cutting edge angle of the rock-cutting tool. The article highlights that the use of pneumatic impactors with increased impact system efficiency in crushers enables the application of compressed air jets for cleaning the receiving openings, grates and conveyor belts, which expands the applications for this design.