5 March 2020 in IEEE Access
The mobility and resource limitation of nodes are the critical factors that affect the performance of Mobile AD hoc network (MANET). The mobility of nodes will affect the stability of links, and the limitation of node resources will lead to congestion, so it is very difficult to design a routing protocol that supports quality of service (QoS) in MANET. Especially in the scenario of high-speed node movement, frequent link interruption will damages QoS performance, so it is necessary to design MANET routing protocol that can adapt to network topology changes to support QoS. In this paper, we propose a Topological change Adaptive Ad hoc On-demand Multipath Distance Vector (TA-AOMDV) routing protocol, which can adapt to high-speed node movement to support QoS. In this protocol, a stable path selection algorithm is designed, which not only takes node resources (residual energy, available bandwidth and queue length) as the path selection parameters, but also considers the link stability probability between nodes. Furthermore, in order to adapt to the rapid change of topology, link interrupt prediction mechanism is integrated into the protocol, which updates the routing strategy based on periodic probabilistic estimates of link stability. Different scenarios with node speed in the range of 10-50m/s, data rate in the range of 4-40kbps and number of nodes in the range of 10-100 are simulated on NS2 platform. Our results show that the QoS metrics (packet delivery rate, end-to-end delay, and throughput) of the proposed protocol are significantly improved when the node speed is higher than 30m/s although it is slightly better when the node speed is lower than 30m/s. Our on-demand multipath routing protocol demonstrates high potential to support QoS for high-speed MANET.
16 February 2021 in ACS Applied Nano Materials
10 August 2020 in Journal of Applied Physics
The ultrahigh carrier mobility and matchable work function of graphene have positioned this material as a leading candidate for the ideal contact material for carbon nanotubes (CNTs). Highly efficient carrier transport through CNT–graphene junctions is facilitated by covalently bonded contacts. This paper, therefore, proposes covalently bonded CNT–graphene junctions and investigates their characteristics theoretically. In these junctions, partially unzipped CNTs are longitudinally or radially bonded with graphene. By exploiting nonequilibrium Green's functions with density-functional theory, we examine ballistic electron transport (∼1.38 × 105 cm2/V s) and edge-dependent transport. Moreover, the contact properties of the junctions with adsorbed Cu atoms are investigated. Electron transfer from Cu to the junction turns the p-type Schottky contact into an n-type contact and decreases the Schottky barrier height from 0.2 to 0.08 eV. Furthermore, the junction resistance decreases by one to three orders of magnitude. The proposed design of Cu-decorated CNT–graphene junctions and first-principles calculations suggest an approach for low-power, high-performance CNT-based electronics.
25 June 2020 in Semiconductor Science and Technology
Carbon nanotube field-effect transistor (CNTFET) based circuit systems have received extensive attention due to their energy-efficiency benefits. However, there is not yet a generally accepted compact SPICE model for CNTFETs compatible with existing electronics design automation platforms. In this paper, the Stanford top gate CNTFET model is optimized through the consideration of different doping levels in source/drain as well as the simplification of an equivalent capacitance network in the intrinsic channel. Based on this, compact models are built for both top gate and wrapped gate CNTFETs. Then the DC properties and the cut-off frequency of top gate and wrapped gate CNTFETs with 15 nm channel length, and their basic logic circuits based on our modelling, are simulated by HSPICE. In the circuit simulation, we add the influence of gate-to-gate capacitance. The influences of structural parameters such as the diameter, number of CNTs and their gap on the current–voltage property, transconductance, cut-off frequency, circuit delay and power consumption are studied. Through comparison with the simulation using the Stanford model, our modelling is more suitable for the design and development of CNTFET circuits. For given parameters, the top gate CNTFETs have a larger maximum cut-off frequency and the wrapped gate CNTFETs’ saturate current is larger. Wrapped gate logic circuits have less delay but more dynamic power than top gate circuits. More CNTs in FETs with a bigger gap and shorter tube pitch lead to less circuit delay and more dynamic power.