8 February 2021 in Space Science Reviews
The Mercury Orbiter Radio Science Experiment (MORE) of the ESA mission BepiColombo will provide an accurate estimation of Mercury’s gravity field and rotational state, improved tests of general relativity, and a novel deep space navigation system. The key experimental setup entails a highly stable, multi-frequency radio link in X and Ka band, enabling two-way range rate measurements of 3 micron/s at nearly all solar elongation angles. In addition, a high chip rate, pseudo-noise ranging system has already been tested at 1-2 cm accuracy. The tracking data will be used together with the measurements of the Italian Spring Accelerometer to provide a pseudo drag free environment for the data analysis. We summarize the existing literature published over the past years and report on the overall configuration of the experiment, its operations in cruise and at Mercury, and the expected scientific results.
18 December 2023 in IEEE Transactions on Geoscience and Remote Sensing
This work shows that additional ScanSAR capabilities, with respect to those achievable through the current Synthetic Aperture Radar (SAR) system of the forthcoming ROSE-L mission, may be easily enabled through a proper shaping of the azimuth pattern of the TX radar antenna. In particular, we show that by properly acting only on the distribution of the input excitations of the elements of the currently designed TX antenna array, we can move from a single azimuth look ScanSAR configuration to a more attractive two-look one. This result is achieved without upsetting the current system architecture and without changing the current mission parameters (such as azimuth resolution, range swath and prf), all tailored to a one-look ScanSAR configuration. On the other hand, the proposed two-look mode requires to double the azimuth beam-width with respect to the one-look mode, thus leading to an unavoidable antenna gain decrease, whose amount is of approximately 3 dB. The presented analysis also shows that, by still acting on the distribution of the input excitations of the TX antenna array, the scalloping effect can be significantly mitigated with respect to that of the current system design, in both scenarios relevant to the original one-look ScanSAR configuration and to the proposed two-look one.
9 January 2014 in IEEE Geoscience and Remote Sensing Letters
This letter deals with the design, realization, and validation of a multimode/multifrequency airborne radar designed for both surface and subsurface prospections. The system operates in the frequency band from very high frequency (VHF) to ultrahigh frequency (UHF) and works in two different modes: 1) a nadir-looking sounder in the VHF band (carrier frequency of 163 MHz); and 2) a side-looking imager (i.e., synthetic aperture radar) in the UHF band with two channels at 450 and 860 MHz, respectively. The system validation has been carried out for the “sounder” mode due to helicopter-borne surveys carried out over an area in the Campania region, Southern Italy. The surveys have provided a first proof of system capability in obtaining useful information about the surface and shallower subsurface layers over a large scale and in a relatively short time. In particular, the data collected by the sounder have been processed by means of a microwave tomographic reconstruction approach, and features consistent with tunnels buried at a depth of 15 m have been identified.
1 April 2019 in Review of Scientific Instruments
The STereo imaging Channel (STC) is the first push-frame stereo camera on board an European Space Agency (ESA) satellite, i.e., the ESA-Japan Aerospace eXploration Agency mission BepiColombo. It was launched in October 2018, and it will reach its target, Mercury, in 2025. The STC main aim is to provide the global three-dimensional reconstruction of the Mercury surface. STC, the stereo channel of spectrometer and imagers for Mercury Planetary Orbiter BepiColombo-Integrated Observatory System, is based on an original optical design that incorporates the advantages of a compact unique detector instrument and the convenience of a double direction acquisition system. In fact, STC operates in a push-frame imaging mode and its two optical sub-channels will converge the incoming light on a single focal plane assembly allowing to minimize mass and volume. The focal plane of the instrument is housing six different filters: two panchromatic filters in the range 600-800 nm and four broadband filters with central wavelengths in the range 420-920 nm. In this paper, the geometrical calibration of the instrument, including the optical setups used, will be described. The methods used to derive the focal lengths, the boresights, and the reference systems of the different filter models are presented, and the related distortion results are discussed. The STC off-axis configuration forced to develop a distortion map model based on the RFM (rational function model). In contrast to other existing models, which allow linear estimates, the RFM is not referred to specific lens geometry, but it is sufficiently general to model a variety of distortion types, as it will be demonstrated in this particular case.