Nonsolvent induced phase separation (NIPS) is the most common approach to produce polymeric membranes. Unfortunately, NIPS relies heavily on aprotic organic solvents like N‐methyl‐pyrrolidone. These solvents are unsustainable, repro‐toxic for humans and are therefore becoming increasingly restricted within the European Union. A new and sustainable method, aqueous phase separation (APS), is reported that eliminates the use of organic solvents. A homogeneous solution of two polyelectrolytes, the strong polyanion poly(sodium 4‐styrenesulfonate) (PSS) and the weak polycation poly(allylamine hydrochloride) (PAH), is prepared at high pH, where PAH is uncharged. Immersing a film of this solution in a low pH bath charges the PAH and results in a controlled precipitation, forming a porous water‐insoluble polyelectrolyte complex, a membrane. Pore sizes can be tuned from micrometers to just a few nanometers, and even to dense films, simply by tuning the polyelectrolyte concentrations, molecular weights, and by changing the salinity of the bath. This leads to excellent examples of microfiltration, ultrafiltration, and nanofiltration membranes. Polyelectrolyte complexation induced APS is a viable and sustainable approach to membrane production that provides excellent control over membrane properties and even allows new types of separations.
Polymeric membranes are used on very large scales for drinking water production and kidney dialysis, but they are nearly always prepared using large quantities of unsustainable and toxic aprotic solvents. In this study, a water-based, sustainable and simple way of making polymeric membranes is presented without the need for harmful solvents or extreme pH conditions. Membranes were prepared from water-insoluble polyelectrolyte complexes (PECs) via aqueous phase separation (APS). Strong PEs, poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDADMAC) were mixed in the presence of excess of salt, thereby preventing complexation. Immersing a thin film of this mixture into a low salinity bath induces complexation and consequently the precipitation of a solid PEC-based membrane. This approach leads to asymmetric nanofiltration membranes, with thin dense top layers and porous, macrovoid-free, support layers. While the PSS molecular weight and the total polymer concentrations of the casting mixture did not significantly affect the membrane structure, they did affect the film formation process, the resulting mechanical stability of the films and the membrane separation properties. The salt concentration of the coagulation bath has a large effect on membrane structure and allows for control over the thickness of the separation layer. The nanofiltration membranes prepared by APS have a low molecular weight cut-off (<300 Da), a high MgSO4 retention (~80%) and good stability even at high pressures (10 bar). PE complexation induced APS is simple and sustainable way to prepare membranes where membrane structure and performance can be tuned with molecular weight, polymer concentration and ionic strength.
8 September 2017 in Journal of Materials Chemistry A
As the use of membrane technology for gas separation has grown, various membrane materials have been developed by numerous researchers to demonstrate separation processes. The present study was intended to make a novel thin film nanocomposite (TFN) membrane hybridized with amino functionalized acid-activated bentonite (ABn-NH) clay. It was projected that the ABn-NH-TFN membranes could improve water vapor permeation performance. The present work was done paying attention to how the incorporation of ABn-NH could affect the TFN membrane physicochemical properties and permeation performance. Thin films of ABn-NH-TFN membranes were prepared using interfacial polymerization on the inner surface of a polysulfone (PSf) hollow-fiber membrane support for the separation of a water vapor/N2 gas mixture. The prepared material and thin film composite membranes were fully characterized using physicochemical techniques including X-ray diffraction, BET surface analysis, thermal gravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM) and contact angle analysis. The concentration effect of ABn-NH clay (0–1.0 wt%) on the permeation of water vapor and N2 was investigated. According to SEM images of the composite membranes, 0.5 wt% of ABn-NH clay particles shows good dispersion on a thin selective layer. Water vapor permeation results showed that with the incorporation of ABn-NH particles into the polyamide membrane, the permeance increases enormously. The most advantageous performance, that of ABn-NH-TFN-3 (0.5 wt%) membrane, was achieved with a water vapor permeance of 2809 GPU and a water vapor/N2 selectivity of 913, with a membrane prepared with 2.0 wt% MPD and 0.2 wt% TMC monomer concentrations of coating solution.
In this study, we report the synthesis of thin film nanocomposite (TFN) membranes by interfacial polymerization (IP) on porous polysulfone (PSf) hollow fiber membrane supports. We also investigate the synthesis of carboxylated TiO2 (C-TiO2) and hydroxylated TiO2 (H-TiO2) nanoparticles using a simple technique and evaluate the performance of the TFN membranes incorporated with these nanoparticles for water vapor separation. Comparative studies were carried out on membranes with and without the incorporation of nanoparticles (TFN and TFC) for water vapor separation. Aqueous 3,5-diaminobenzoic acid (DABA)/nanoparticles mixture solutions and organic trimesoyl chloride (TMC) were used in the IP process. The reaction between these two monomer solutions at the interfaces of PSf hollow fiber substrates resulted in the formation of the TFN membranes. Functionalized TiO2 nanoparticles (TiO2NPs) with a size of about 60 nm were used for the fabrication of the TFN hollow fiber membranes. These TFN membranes were characterized using different modern techniques and evaluated in comparison with the tidy TFC membranes. Their performances were evaluated based on the water vapor permeability and selectivity. Experimental results indicate that the carboxylated TiO2 nanoparticle (C-TiO2NPs) incorporated membrane shows improved performance compared to other membranes. By changing the nanoparticles, better hydrophilicity was obtained; the contact angle was decreased from 90° (PSf) to 46° (TFN) and the water vapor permeance was increased from 780 GPU (TFC) to 1131 GPU (TFN) with high selectivity being maintained (from 115 to 548) when the C-TiO2NPs content was 0.05 (wt%).