28 August 2017 in International Materials Reviews
Powder metallurgy (PM) of titanium is a potentially cost-effective alternative to conventional wrought titanium. This article examines both traditional and emerging technologies, including the production of powder, and the sintering, microstructure, and mechanical properties of PM Ti. The production methods of powder are classified into two categories: (1) powder that is produced as the product of extractive metallurgy processes, and (2) powder that is made from Ti sponge, ingot, mill products, or scrap. A new hydrogen-assisted magnesium reduction (HAMR) process is also discussed. The mechanical properties of Ti-6Al-4V produced using various PM processes are analyzed based on their dependence on unique microstructural features, oxygen content, porosity, and grain size. In particular, the fatigue properties of PM Ti-6Al-4V are examined as functions of microstructure. A hydrogen-enabled approach for microstructural engineering that can be used to produce PM Ti with wrought-like microstructure and properties is also presented. Abbreviations: AM: additive manufacturing; ARC: Albany Research Center; BE: blended elemental; BUS: broken-up structure; CCGA: close-coupled gas atomisation; CHIP: CIP-sinter-HIP; CIP: cold isostatic pressing; CP-Ti: commercially pure Ti; DRTS: direct reduction of Ti-slag; CSIR: Council for Scientific and Industrial Research (South Africa); CSIRO: Commonwealth Scientific and Industrial Research Organization (Australia); EIGA: electrode induction gas atomisation; EMR: electronically mediated reduction; FFC: Fray, Farthing, and Chen; GA: gas atomisation; GIF: gaseous isostatic forging; GSD: granulation-sintering-deoxygenation; HAMR: hydrogen-assisted magnesium reduction; HDH: hydride–dehydride; HIP: hot isostatic pressing; HSPT: hydrogen sintering and phase transformation; MA: master alloy; MER: Materials & Electrochemical Research Corporation (US); MHR: metal hydride reduction; MIM: metal injection molding; OM: optical microscope; OS: Ono and Suzuki; PA: pre-alloyed; P/C: performance to cost ratio; PIF: pneumatic isostatic forging; PM: powder metallurgy; PREP: plasma rotating electrode process; PP: post-processing; PS: press and sinter; QIT: Quebec Iron & Titane, Inc. (Canada); SEM: scanning electron microscope; SPS: spark plasma sintering; SOM: solid oxide membrane; THP: thermohydrogen processing; TMP: thermomechanical processing; UFG: ultrafine grain; UGS: upgraded titanium slag; UTS: ultimate tensile strength; USTB: University of Science and Technology Beijing (China); VA: vacuum atomisation; VHP: vacuum hot pressing; WP: wrought process; YS: yield strength
1 January 2011 in Journal of the Electrochemical Society
Molten oxide electrolysis (MOE) is a carbon-free, electrochemical technique to decompose a metal oxide directly into liquid metal and oxygen gas. From an environmental perspective what makes MOE attractive is its ability to extract metal without generating greenhouse gases. Hence, an inert anode capable of sustained oxygen evolution is a critical enabling component for the technology. To this end, iridium has been evaluated in ironmaking cells operated with two different electrolytes. The basicity of the electrolyte has been found to have a dramatic effect on the stability of the iridium anode. The rate of iridium loss in an acidic melt with high silica content has been measured to be much less than that in a basic melt with high calcia content.
1 October 2015 in Scripta Materialia
1 February 2017 in Scientific Reports
Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titanium alloys with exceptional fatigue strength via the hydrogen sintering and phase transformation (HSPT) process. The high fatigue strength presented in this work is achieved by creating wrought-like microstructures without resorting to wrought processing. This is accomplished by generating an ultrafine-grained as-sintered microstructure through hydrogen-enabled phase transformations, facilitating the subsequent creation of fatigue-resistant microstructures via simple heat treatments. The exceptional strength, ductility, and fatigue performance reported in this paper are a breakthrough in the field of low-cost titanium processing.
8 September 2015 in Metallurgical and Materials Transactions A
15 July 2025 in Acta Materialia