21 August 2017 in Advanced Energy Materials
This study reports a Li–S battery cathode of high volumetric capacity enabled by novel micro‐ and mesostructuring. The cathode is based on monodisperse highly porous carbon nanospheres derived from a facile template‐ and surfactant‐free method. At the mesoscale, the nanospheres structure into interconnected close‐packed clusters of a few microns in extent, thus facilitating the fabrication of dense crack‐free high areal sulfur loading (5 mg cm−2) cathodes with high electrical conductivity and low cathode impedance. A combination of the nitrogen doping (5 wt%), high porosity (2.3 cm3 g−1), and surface area (2900 m2 g−1) at the microscale enables high sulfur immobilization and utilization. The cathode delivers among the best reported volumetric capacity to date, above typical Li‐ion areal capacity at 0.2 C over 200 cycles and low capacity fading of 0.1% per cycle at 0.5 C over 500 cycles. The compact cathode structure also ensures a low electrolyte requirement (6 µL mg−1), which aids a low overall cell weight, and further, among the best gravimetric capacities published to date as well.
11 September 2017 in Journal of Materials Chemistry A
Synchrotron X-ray diffraction and inelastic neutron scattering measurements have been applied to evaluate the breathing phenomena in small nanocrystals of ZIF-7 upon gas adsorption. The experimental results show that an extended solvent exchange process with methanol is crucial to get a solvent-free narrow pore structure. Under these conditions, nano-ZIF-7 is indeed able to adsorb N2 with a total BET surface area of around 380 m2 g−1, in close agreement with theoretical predictions. The breathing phenomenon upon nitrogen adsorption is accompanied by a phase-to-phase transition, from a narrow-pore (phase II) to a large-pore (phase I) structure and a suppression of the cooperative deformation of the framework involving mainly the flapping motion of the benzimidazolate (bIm) ligand with the 4- and 6-membered rings. Whereas nitrogen requires temperature and pressure conditions close to condensation (close to 1 bar and 77 K) to induce the breathing in ZIF-7, CO2 can do it under milder conditions (at room temperature and low relative pressures). These results reflect that the nature of the adsorptive probe and the gas–framework interactions, rather than the molecular diameter and/or shape, play a crucial role in defining the pressure and temperature conditions required to induce the breathing. The presence of two different cavities in ZIF-7 as suggested by theoretical predictions, one with a window diameter of below 0.4 nm (cavity A) and the other with a pore size of around 0.6 nm (cavity B), has been confirmed experimentally using immersion calorimetry.
1 January 2018 in Microporous and Mesoporous Materials
MMManuel Martínez-Escandell
Manuel Martínez-Escandell
23 March 2017 in ChemistrySelect
JFJavier Fernández‐Catalá
+2