The precision spool valve is the core component of the electro-hydraulic servo control system, and its performance has an important influence on the flight control of aviation and aerospace products. The non-uniform surface topography error causes a non-uniform mating gap field inside the spool valve, which causes oil leakage and leads to deterioration of the spool valve performance. However, the current oil leakage calculation method only considers the influence of size errors, which is not comprehensive. Thus, how to characterize the mating behavior of the spool valve and its effect on oil leakage with consideration of surface topography errors is the key to evaluating the performance of the spool valve. This paper proposes a new way of analyzing the mating performance of precision spool valves, which considers the surface topography errors based on digital twin technology. Firstly, a general framework for the analysis of mating performance of precision spool valve based on a digital twin is proposed. Then, key technologies of assembly interface geometry modeling, matching behavior modeling and performance analysis are studied. Finally, a quantitative correlation between the mating parameters and the oil leakage of the precision spool valve is revealed. The method is tested on a practical case. This proposed method can provide theoretical support for the accurate prediction and evaluation of the mating performance of the precision spool valve.
This work proposes a Kinect V2-based visual method to solve the human dependence on the yarn bobbin robot in the grabbing operation. In this new method, a Kinect V2 camera is used to produce three-dimensional (3D) yarn-bobbin point cloud data for the robot in a work scenario. After removing the noise point cloud through a proper filtering process, the M-estimator sample consensus (MSAC) algorithm is employed to find the fitting plane of the 3D cloud data; then, the principal component analysis (PCA) is adopted to roughly register the template point cloud and the yarn-bobbin point cloud to define the initial position of the yarn bobbin. Lastly, the iterative closest point (ICP) algorithm is used to achieve precise registration of the 3D cloud data to determine the precise pose of the yarn bobbin. To evaluate the performance of the proposed method, an experimental platform is developed to validate the grabbing operation of the yarn bobbin robot in different scenarios. The analysis results show that the average working time of the robot system is within 10 s, and the grasping success rate is above 80%, which meets the industrial production requirements.
To solve the problem of low precision of pearl shape parameters’ measurement caused by the mutual contact of batches of pearls and the error of shape sorting, a method of contacting pearls’ segmentation based on the pit detection was proposed. Multiple pearl images were obtained by backlit imaging, the quality of the pearl images was improved through appropriate preprocessing, and the contacted pearl area was extracted by calculating the area ratio of the connected domains. Then, the contour feature of the contact area was obtained by edge tracking to establish the mathematical model of the angles between the edge contour points. By judging the angle with a threshold of 60° as the candidate concave point, a concave point matching algorithm was introduced to get the true concave point, and the Euclidean distance was adopted as a metric function to achieve the segmentation of the tangent pearls. The pearl shape parameters’ model was established through the pearl contour image information, and the shape classification standard was constructed according to the national standard. Experimental results showed that the proposed method produced a better segmentation performance than the popular watershed algorithm and morphological algorithm. The segmentation accuracy was above 95%, the average loss rate was within 4%, and the sorting accuracy based on the shape information was 94%.