14 August 2017 in Structural Concrete
1 November 2018 in Cement and Concrete Composites
1 June 2011 in Journal of Composites for Construction
The flexural behavior of fiber-reinforced polymer (FRP)–strengthened beams after exposure to elevated temperatures in an electrical furnace was investigated. Twenty-five specimens making up unstrengthened beams and FRP-strengthened beams were fabricated. Glass and basalt FRP systems were used with and without protective systems, which included a cement mortar overlay and two types of commercially available intumescent coatings. Typical temperature-time histories at the surface of FRP laminates, FRP-concrete interface, internal steel bars, and center of beams were monitored by using two specimens. The other specimens were tested to failure under three-point bending after subjecting them to elevated temperatures. Test results indicated a general decrease in the initial stiffness and ultimate strength of the specimens with an increase in the exposed temperature. The protective systems appeared to preserve the structural integrity of glass FRP systems when the elevated temperature was less than approximately ...
21 November 2017 in Structural Concrete
5 June 2018 in Structural Concrete
1 September 2017 in IOP Conference Series: Materials Science and Engineering
The punching shear capacity of steel fibre reinforced concrete (SFRC) slabs without traditional steel bar reinforcement was investigated by conducting central point-load tests on twelve square slabs. The test parameters covered fibres with different multi-hook ends, concrete compressive strength, reinforcing index and slab thickness. The statistical performance of two existing models for the prediction of punching shear capacity of SFRC slabs without traditional reinforcement was examined. The load carrying capacity of these slabs were also assessed using the yield line theory. It is noted that the slabs failed primarily in flexure and the yield line theory predicted the load carrying capacities of the slabs most accurately. The reason for a flexural failure in SFRC slabs without steel bars is attributed to the lesser energy required in the propagation of an existing flexural cracks than in the creation of a new circumferential cracks around the column face.