21 June 2018 in Mineral Processing and Extractive Metallurgy Review
There has been increasing demands for large-scale pelletization equipment recently in order to improve the composition of blast furnace burden, conserve energy and reduce emission. Accordingly, the BaoSteel built the Zhanjiang palletization plant with the capacity of 5 million-tons per year, which holds the record in the world for the largest grate-kiln to produce fluxed pellets. The features included preprocessing raw materials with the combination of ball mills and high-press roller presses, production of fluxed pellets with limestone, pre-mixing of dust wastes, and advanced desulfurization technologies. This plant has marked an important step in the development of grate-kiln pelletization technology.
1 March 2021 in IOP Conference Series: Earth and Environmental Science
This research focuses on the preparation of autoclaved aerated concrete (AAC) with construction waste as the main raw materials. The properties of dry density and compressive strength of AAC were tested to determine the optimum mix proportion of raw materials and the construction waste fineness. The results indicated that the optimum mix proportion of raw materials was consist of 55-65% construction waste, 15-21% cement and 18-22% quicklime, together with 2% gypsum and 0.1% aluminum powder, the construction waste was mechanically milled for 20 min, and cured in the conditions of autoclave pressure 1.5 MPa for 6 h, the compressive strength of AAC samples were higher than 5.0 MPa, and dry density value could reach 650-700 Kg/m3, which meet the requirements of A5.0 B07 grade in the Autoclaved aerated concrete blocks (GB11968-2006). The analysis of microstructure and phase compositions of the AAC samples showed that the tobermorite, calcite and CSH were formed in the process of autoclave curing, and CSH gels were combined through the skeletons formed by tobermorite crystals, the interconnected and porous microstructure contributed to the good properties of low density and high strength of AAC.
1 January 2015 in Journal of Communications
28 January 2018 in Journal of Electrical and Computer Engineering
In this paper, firstly, we study the linear processing of amplify-and-forward (AF) relays for the multiple relays multiple users scenario. We regard all relays as one special “relay”, and then the subcarrier pairing, relay selection and channel assignment can be seen as a linear processing of the special “relay”. Under fixed power allocation, the linear processing of AF relays can be regarded as a permutation matrix. Employing the partitioned matrix, we propose an optimal linear processing design for AF relays to find the optimal permutation matrix based on the sorting of the received SNR over the subcarriers from BS to relays and from relays to users, respectively. Then, we prove the optimality of the proposed linear processing scheme. Through the proposed linear processing scheme, we can obtain the optimal subcarrier paring, relay selection and channel assignment under given power allocation in polynomial time. Finally, we propose an iterative algorithm based on the proposed linear processing scheme and Lagrange dual domain method to jointly optimize the joint optimization problem involving the subcarrier paring, relay selection, channel assignment and power allocation. Simulation results illustrate that the proposed algorithm can achieve a perfect performance.