8 June 2015 in Optics Express
Within the field of high-power second harmonic generation (SHG), power scaling is often hindered by adverse crystal effects such as thermal dephasing arising from the second harmonic (SH) light, which imposes limits on the power that can be generated in many crystals. Here we demonstrate a concept for efficient power scaling of single-pass SHG beyond such limits using a cascade of nonlinear crystals, in which the first crystal is chosen for high nonlinear efficiency and the subsequent crystal(s) are chosen for power handling ability. Using this highly efficient single-pass concept, we generate 3.7 W of continuous-wave diffraction-limited light at 532 nm from 9.5 W of non-diffraction-limited light from a tapered laser diode, while avoiding significant thermal effects. Besides constituting the highest SH power yet achieved using a laser diode, this demonstrates that the concept successfully combines the high efficiency of the first stage with the good power handling properties of the subsequent stages. The concept is generally applicable and can be expanded with more stages to obtain even higher efficiency, and extends also to other combinations of nonlinear media suitable for other wavelengths.
29 November 2017 in IEEE Journal of Quantum Electronics
In this paper, we investigate the noise performance and transfer in a titanium sapphire (Ti:S) laser system. This system consists of a DBR tapered diode laser, which is frequency doubled in two cascaded nonlinear crystals and used to pump the Ti:S laser oscillator. This investigation includes electrical noise characterizations of the utilized power supplies, the optical noise of the fundamental light, the second harmonic light, and finally the optical noise of the femtosecond pulses emitted by the Ti:S laser. Noise features originating from the electric power supply are evident throughout the whole transfer chain. It is demonstrated that improving the electrical noise provides an easy method for reducing the relative intensity noise (RIN) in all stages. The frequency doubled light is shown to have a higher RIN than the fundamental light. In particular, the cascaded system is seen to exhibit higher RIN than a setup with only a single nonlinear crystal. The Ti:S is shown to have a cut-off frequency around 500 kHz, which means that noise structures of the pump laser above this frequency are strongly suppressed. Finally, the majority of the Ti:S noise seems to originate from the laser itself, which partly can be explained by the effect of relaxation oscillation frequency.
1 March 2015 in Optics Communications
28 May 2019 in Optics Letters
In this Letter, a novel technique for independent control of the phase-matched center wavelength and bandwidth (BW) is demonstrated for upconversion detection in the 2–4 μm range using a fanout lithium niobate (LN) crystal. A compact, all-semiconductor, 975 nm laser delivering 3.5 W of power is used as the pump in a single-pass upconversion configuration. A globar () is used as the infrared test source. Continuous tuning of the detected wavelength () and BW () has been realized using mechanical translation and rotation, respectively, of the fanout LN crystal. A comparison between the performance of the fanout LN and a conventional periodically poled LN crystal is made. The upconverted light is detected using a commercial silicon-spectrometer. The demonstrated technique allows tailored spectral upconversion based on collinear interaction. Numerical simulations are made to complement the experimental results.
1 November 2014 in Journal of Optics
11 May 2017 in Electronics Letters
Design and fabrication of a monolithic, single aperture widely tuneable diode laser emitting around 970 nm is presented. Overgrown sampled grating Bragg reflectors are applied to setup wavelength selective mirrors. Wavelength tuning is achieved via the Vernier effect with thermal heaters placed on top of the sampled gratings. The 20 nm quasi‐continuous tuning around 970 nm with an optical side mode suppression ratio in excess of 40 dB is demonstrated and an optical output power of more than 30 mW at a pump current of 180 mA is presented.