12 October 2018 in IEEE Transactions on Electromagnetic Compatibility
The nanoscale regime in current IC technology considers mixed carbon nanotube bundles (MCBs) as a potential on-chip interconnect alternative to the conventional copper interconnects. This paper presents a temperature-dependent equivalent single conductor (ESC) model for on-chip MCB interconnect structure. A finite-difference time-domain (FDTD) technique is used to model the Telegrapher's equations. To the best of authors’ knowledge, it is for the first time that temperature-dependent ESC modeling and crosstalk for coupled-MCB interconnect line structures have been reported using FDTD. The proposed numerical model is highly time as well as memory efficient and accurate to analyze the crosstalk induced propagation delay, and peak voltage for different cases of input switching. The performance parameters obtained for the proposed model are validated with HSPICE simulations. The crosstalk induced propagation delay shows less than 1% error for the proposed model and HSPICE simulations. The robustness of the proposed model is verified against a range of test cases. The proposed model is of high importance as it can be used to determine the crosstalk induced performance metrics for on-chip MCB interconnects.
24 December 2021 in IEEE Open Journal of Nanotechnology
This paper presents the transient analysis of the equivalent single conductor (ESC) model of hybrid Cu-CNT on-chip interconnects for nanopackaging using matrix rational approximation (MRA) modeling technique. The analysis of propagation delay and peak crosstalk noise is carried out for single and coupled Cu-CNT interconnect lines at 14nm and 22nm technology nodes. It has been observed that the proposed MRA model provides a speed-up factor of 131 compared to the HSPICE. An error of less than 1% confirms the accuracy of the proposed model compared to the SPICE simulations. It is observed that Cu-CNT lines are more immune to the crosstalk due to lesser coupling effects compared to Cu and CNT interconnects. The efficacy, accuracy, and comprehensive analysis using the proposed model ensures immense application possibility of the proposed model in the VLSI design automation tools at the nanopackaging level.
23 June 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
In this paper, a closed-form matrix rational approximation (MRA) model is presented for the reliability assessment of copper-graphene hybrid on-chip interconnect networks. The key feature of this MRA model is its capacity to predict how different values of temperature and dielectric roughness affect the signal integrity performance of the hybrid interconnect networks. As a result, the proposed MRA model is well-suited for very fast parametric sweeps and worst-case analysis of the hybrid interconnect networks, which has not been possible using existing closed-form models or even SPICE simulations. Numerical examples show that the proposed model is significantly more efficient than conventional models while exhibiting error less than 5%.
7 December 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This paper presents a fast and accurate edge-roughness aware exponential matrix – rational approximation (EM-RA) model to capture the signal integrity effects, namely, crosstalk noise and the propagation delay, in coupled-multilayer graphene nanoribbon (MLGNR) interconnects. The proposed model provides a speed-up factor of 75 for coupled-two and a speed-up factor of 51 for coupled-three MLGNR lines in comparison to the industry level simulation program with integrated circuit emphasis (SPICE) simulator. The proposed model results always lie within a 1% error band compared to the HSPICE simulations, thereby ensuring the proposed model’s excellent accuracy. The robustness of the proposed edge-roughness aware EM-RA is confirmed by its application to a range of test-cases in coupled-three MLGNR interconnects network. It is observed that the edge-roughness variations modeling play critical role in narrow (≤ 45 nm) MLGNRs. To ensure the signal integrity further, the eye-diagram analysis for the worst-case scenario considering fully rough-edged MLGNR lines is carried out that provides the eye-height of 864.53 mV and the eye-width of 220.17 ps. The results obtained using the proposed closed-form parameterized EM-RA model ensures its immense possibility of incorporation in VLSI design automation tools for efficient capturing of the signal integrity effects in MLGNR interconnect networks.
23 June 2021 in IEEE Transactions on Electromagnetic Compatibility
This article presents a variation-aware exponential matrix–rational approximation (EM-RA) model for the signal integrity analysis in single-walled carbon nanotube (SWCNT) bundle and hybrid copper-CNT (Cu-CNT) on-chip interconnects. The variations include temperature (300–500 K) only, and temperature (300–500 K) and dielectric surface roughness (10–180 pm) both. The transient analysis is carried out for the signal integrity parameters, crosstalk and propagation delay, estimation using the proposed EM-RA model. The results obtained using the proposed model are compared with the industry-level simulation program with an integrated circuit emphasis (SPICE) simulator. The comparison shows excellent agreement for the results with less than 1% error. The proposed model is also compared for the computational time complexity. It is observed that a speed-up factor of 74.24 and 48.35 is attained using the proposed temperature-parameterized model during the analysis of coupled-two and coupled-three interconnect lines, respectively. The speed-up further increases to 485.41 and 378.35 for coupled-two and coupled-three lines, respectively, when the temperature and dielectric surface roughness parametrized EM-RA model is used. This computational CPU time expense efficiency and the accuracy of the proposed model in comparison to the HSPICE simulator ensures immense possibility regarding its implementation in computer-aided design (CAD) tools for carrying out the transient analysis of SWCNT bundle and Cu-CNT interconnect lines. Encouraging results for the eye-diagram analysis reports 95.54% and 99.37% of the eye height and eye width for the SWCNT network, and 99.77% and 99.96% of the eye height and eye width for the Cu-CNT.
29 June 2021 in IEEE Transactions on Nanotechnology
This paper presents an edge roughness (ER) and dielectric surface roughness (DSR) - aware exponential matrix-rational approximation (EM-RA) model for the transient analysis of multi-layer graphene nanoribbon (MLGNR) interconnects. The proposed model analyzes the signal integrity in terms of the peak crosstalk and the propagation delay. The results obtained using the proposed ER and DSR aware EM-RA model for the crosstalk and delay analysis are compared with the industry-standard SPICE simulator. The ER and DSR aware EM-RA model results have excellent accuracy compared to HSPICE with less than 0.5% error. The proposed model provides a speed-up by a factor of 84.36 and 86.05 for carrying out the signal integrity analysis in coupled-two and coupled-three MLGNR interconnect lines, respectively, in comparison to HSPICE. The speed-up further increases with the more refined 2D ER and DSR grid of variations. The CPU memory efficacy of the proposed model is compared with HSPICE. The proposed models stability is analyzed for a range of local to global interconnects.