30 March 2018 in ACS Energy Letters
15 March 2018 in Journal of the Electrochemical Society
Catalyst layer inks are examples of biphasic material systems composed of a solid material, a polymer, and a solvent. Nanoscale interactions between the individual constituents can alter macroscopic properties that are relevant for coating and manufacturing processes (i.e. viscosity, surface tension, aggregation, and rheology). Control over these macroscale properties are important for controlled electrode formation during scalable roll-to-roll manufacturing. The underlying interactions include polymer|particle, particle|solvent, and polymer|solvent interactions. In this work we systematically investigate polymer|particle interactions via studying a range of formulated inks composed of different solvents (methanol, isopropyl alcohol, octanol, and water), varying polymer loadings, and particles with different surface charges. Ink aging is also addressed and over short time periods (<1 hr shelf life) the addition of a perfluorosulfonic acid ionomer was shown to stabilize the ink and also decrease the aggregation size. However, over long time periods (168 hrs) the aggregation size is independent of polymer loading, and approaches a steady state aggregation size around 350 nm. This equilibrium point suggests that the polymer is free to diffuse, adsorb, and relax within the excluded volume region. Furthermore, these results suggest that primary aggregates can be broken up with the addition of very low polymer loadings (15% I:C). A semi-empirical model is used to describe polymer|particle interactions within the ink, and the polymer coverage at the surface of the carbon was found to be the most sensitive parameter dictating ink stability. Finally, coating and rheology experiments are completed on all inks.
14 September 2020 in ACS Applied Energy Materials
18 December 2018 in ACS Applied Materials & Interfaces
25 June 2019 in Journal of Materials Chemistry A
Hybrid solid electrolytes are composed of organic (polymer) and inorganic (ceramic) ion conducting materials, and are promising options for large-scale production of solid state lithium–metal batteries. Hybrid solid electrolytes containing 15 vol% Al-LLZO demonstrate optimal ionic conductivity properties. Ionic conductivity is shown to decrease at high inorganic loadings. This optimum is most obvious above the melting temperature of polyethylene oxide where the polymer is amorphous. Structural analysis using synchrotron nanotomography reveals that the inorganic particles are highly aggregated. The aggregation size grows with inorganic content and the largest percolating clusters measured for 5 vol%, 15 vol% and 50 vol% were ∼12 μm3, 206 μm3, and 324 μm3, respectively. Enhanced transport in hybrid electrolytes is shown to be due to polymer|particle (Al-LLZO) interactions and ionic conductivity is directly related to the accessible surface area of the inorganic particles within the electrolyte. Ordered and well-dispersed structures are ideal for next generation hybrid solid electrolytes.