13 July 2023 in Environmental Technology & Innovation
18 February 2026 in Journal of Environmental Chemical Engineering
6 June 2026 in Bioresource Technology
1 May 2026 in Environmental Research Communications
The increasing presence of heavy metals such as copper (Cu 2+ ) in aquatic environments poses major risks to ecosystems and public health. Conventional wastewater treatment systems are typically inefficient at recovering valuable metals and rarely integrate circular economy principles, leading to resource loss and secondary pollution. This study evaluates the feasibility of using partial nitrification–Anammox granular sludge as a regenerable biosorbent for Cu 2+ recovery under mild conditions. Biosorption experiments were conducted under controlled conditions, with approximately 70% of the initially added copper retained by the granules. Desorption was optimized by using sodium chloride (NaCl) as a benign, low-impact alternative to conventional acidic eluents, reaching equilibrium within 60 min and following pseudo-second order kinetics. The maximum experimental design desorption efficiency was 36% under the evaluated conditions, without significant changes in granule morphology. Metabolic activity analysis showed an ∼87% decrease in specific nitrifying activity after copper exposure, followed by a complete loss of activity after saline desorption. In contrast, specific Anammox activity decreased by nearly three-fold but remained functional after desorption. Reusability tests over five biosorption–desorption cycles demonstrated consistent copper removal (∼60% of influent Cu 2+ ) and average desorption efficiencies of ∼60% of the retained copper during cyclic operation, without visible deterioration of the granular structure. These results contribute to the understanding of metal recovery using microbial granules and offer a foundation for the development of integrated strategies that combine nitrogen removal and copper capture in wastewater treatment systems based on sustainable economy.