1 October 2022 in Advanced Materials Letters
This study first demonstrated the possibility of the production of catalyst supports in the form of granules and tablets composed of nanoparticles of Fe atom cluster-doped CNTs using mini-mold forming and spark plasma sintering (SPS) techniques respectively. The pilot samples of the novel catalyst system containing 3% NiO active phase, synthesized on the granulated Fe cluster-doped CNTs carrier, were tested to determine their catalytic activity and coking resistance in the DRM reaction, in a wide range of temperatures up to 900oC. The developed novel catalyst systems’ samples were characterized before and after the catalyst reaction using SEM, EDX, XRD, and AES methods. It is shown that the temperature dependence of the catalytic activity of the 3% NiO catalyst, supported on the granulated Fe cluster-doped CNTs carrier, revealed two characteristic temperature ranges with different rates of efficiency. Particularly, at high reaction temperatures, starting from 700oC, the conversion rates of methane and carbon dioxide (42.4% and 45.6% respectively) have more than doubled at 850oC. Starting from 850oC to 900oC the latter tends to exceed the carbon dioxide conversion rate, and at 900oC it amounts to 95%.
24 February 2017 in AIP Conference Proceedings
The present research is dealing with the comparative study of inelastic/elastic behavior of reference ∼12%Cr steel ZL3 and three new trial steels ZU1, ZU2, ZU3, with different ratio of alloying elements and equal content of Cr, using internal friction measurements. The samples were examined in “as-received” condition and after additional electric current tempering at 700˚C under different fixed external mechanical tensions. The values of deformation critical amplitudes for dislocation breakaway (ε1) and for microplastic deformation beginning (ε2) were determined in addition to the activation energies of relaxation processes in the investigated steels. It is shown that all the three trial steel samples in “as-received” condition exhibit considerably higher values of ε2 in comparison to those of reference ZL3 steel. Among them the ZU3 steel has the highest values of ε1 and ε2, and demonstrates the visible (∼40%) increase in strength characteristics at elevated temperatures (600÷750˚C), achieved by the additional electric current tempering under mechanical tension.
16 September 2014 in Journal of Technical Science and Technologies
In the present work structural transformations of high-carbon austenite is investigated. The effects of thermal conditions on the ductile iron structure transformation are evaluated by metallographic analyses, TEM, X-ray and mechanical testing. It has been shown that austenite transformation by quenching and isothermal annealing at the intermediate temperatures is similar for the examined cast irons and high-carbon steels.