5 June 2015 in IEEE Sensors Journal
This paper presents the performance analysis of a sensing configuration of refractive index, based on surface plasmon resonance (SPR) in microstructured D-type optical fiber with a thin gold layer, using the finite-element method. The configuration is analyzed in terms of the loss and distribution Poynting vector. The results are compared with a conventional SPR D-type optical fiber sensor for refractive index measurement. The simulation results show an improvement of the sensitivity and resolution (10 × 10 3 nm/RIU and 9.8 × 10 -6 RIU, respectively, when considering an accurately spectral variation detection of 0.1 nm).
10 August 2012 in Photonic Sensors
Recently, many programs have been developed for simulation or analysis of the different parameters of light propagation in optical fibers, either for sensing or for communication purposes. In this paper, it is shown the COMSOL Multiphysics as a fairly robust and simple program, due to the existence of a graphical environment, to perform simulations with good accuracy. Results are compared with other simulation analysis, focusing on the surface plasmon resonance (SPR) phenomena for refractive index sensing in a D-type optical fiber, where the characteristics of the material layers, in terms of the type and thickness, and the residual fiber cladding thickness are optimized.
1 January 2017 in Optical Fiber Technology
23 February 2017 in IEEE Sensors Journal
This paper presents an optical fiber sensor, that uses surface plasmon resonance on metallic wires to directly and simultaneously measure both the refractive index and the temperature. The sensor is constituted by gold wires on a D-type fiber engineered, using numerical simulations based on the finite-element method to support plasmon modes with strong dependencies to either one of the measured parameters. In particular, the influence of the temperature on the structure of the plasmon modes results from contributions from the thermo-optic effect in the fiber core and sensing layer, and phonon-electron scattering along with electron-electron scattering in the metal wire. The performance of the sensor is evaluated in terms of its sensitivity and resolution.
4 July 2019 in Journal of Physics D: Applied Physics
A ‘minimal’ kinetic model of plasmachemical processes in low-current discharges in high-pressure air is formulated, which takes into account electrons, an effective species of positive ions, and three species of negative ions. The model is implemented as a part of numerical model of low-current quasi-stationary discharges in high-pressure air based on the use of stationary solvers, which offer important advantages in simulations of steady-state discharges compared to standard approaches that rely on time-dependent solvers. The model is validated by comparison of the computed inception voltage of corona discharges with several sets of experimental data on glow coronas. A good agreement with the experiment has been obtained for positive coronas between concentric cylinders in a wide range of pressures and diameters of the cylinders. The sensitivity of the computation results with respect to different factors is illustrated. Inception voltages of negative coronas, computed using the values of the secondary electron emission coefficient of 10 −4 –10 −3 , agree well with the experimental data. A simplified kinetic model for corona discharges in air, which does not include conservation equations for negative ion species, has been proposed and validated. Modelling of positive coronas in rod-to-plane electrode configuration has been performed and the computed inception voltage was compared with experimental data.
25 February 2021 in Journal of Physics D: Applied Physics
Since experiments cannot clarify the mechanism of current transfer to non-thermionic arc cathodes, this can only be done by means of numerical modelling based on first principles and not relying on a priori assumptions. In this work, the first quarter-period after the ignition of an AC arc on cold electrodes in atmospheric-pressure argon is investigated by means of unified one-dimensional modelling, where the conservation and transport equations for all plasma species, the electron and heavy-particle energy equations, and the Poisson equation are solved in the whole interelectrode gap up to the electrode surfaces. Results are compared with those for DC discharges and analysed with the aim to clarify the role of different mechanisms of current transfer to non-thermionic arc cathodes. It is found that the glow-to-arc transition in the AC case occurs in a way substantially different from the quasi-stationary glow-to-arc transition. The dominant mechanisms of current transfer to the cathode during the AC arc ignition on cold electrodes are, subsequently, the displacement current, the ion current, and thermionic emission current. No indications of explosive emission are found. Electron emission from the impact of excited atoms can hardly be a dominant mechanism either. The introduction of the so-called field enhancement factor, which is used for description of field electron emission from cold cathodes in a vacuum, leads to computed cathode surface temperature values that are appreciably lower than the melting temperature of tungsten even in the quasi-stationary case. This means that pure tungsten cathodes of atmospheric-pressure argon arcs can operate without melting, in contradiction with experiments.