Being a major constituent of hard tissues found in humans, synthetic hydroxyapatite (HA) as a substitute to natural bone and teeth is gaining importance. In particular, nano hydroxyapatite is expected to impart considerably superior properties. The current research focuses on identification of mechanism of the formation of HA nano-crystals during its preparation when surfactant nano reactors are used for their nucleation and growth. In addition to having a rod-shaped morphology, high resolution electron microscopy has revealed the presence of 2-5 nm crystals within individual particles of HA. The HA particles were not completely hollow, rather nano sized spherical pores of about 5 nm size, have been observed in TEM. These pores are suggested to have formed due to evolution of gases during processing.
An extraction and stripping study of Ce(IV) ions by using supported liquid membranes has been performed. Tri-n-octylamine has been used as a carrier diluted in xylene. Sodium carbonate, ascorbic acid (AA), and mandelic acid (MA) have been used in the stripping phase. AA and MA reduce the Ce(IV) ions by their anion transport to the feed solution containing Ce(IV) ions and sulfuric acid. Transport of cerium ions has been observed with sodium carbonate as the strippant. The flux of these ions increases with an increase in the system operating temperature. Optimal conditions for the transport of cerium ions have been found to be 0.4 M H2SO4 in the feed and 0.2 M TOA in the membrane.
Hydroxyapatite (HA) is considered to form major component of bones and teeth. Synthesis of hydroxyapatite (Calcium phosphate, Ca10(PO4)6(OH)2) was carried out to produce nano powders. The size and shape of nano particles was controlled during synthesis by using templates of Cetyl Trimethyl Ammonium Bromide (CTAB). A cationic surfactant, CTAB creates micellar structures which would act as nano reactors for the synthesis of nano scale HA. Yield of the final product has also been examined by varying the surfactant concentration. X-ray diffraction data revealed characteristic peaks of HA, where a predominantly hexagonal lattice structure could be deduced. FTIR was used to observe the various chemical groups present in the product. Scanning electron microscope was used for the characterization of nano particles.