The aim of this paper was to synthesize and characterize polymeric scaffolds of Chitosan/Xanthan/Hydroxyapatite-Graphene Oxide nanocomposite associated with mesenchymal stem cells for regenerative dentistry application. The chitosan-xanthan gum (CX) complex was associated with Hydroxyapatite-Graphene Oxide (HA-GO) nanocomposite with different Graphene Oxides (GO) concentration (0.5 wt%; 1.0 wt%; 1.5 wt%). The scaffolds characterizations were performed by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and contact angle. The mechanical properties were assessed by compressive strength. The in vitro bioactivity and the in vitro cytotoxicity test (MTT test) were analyzed as well. The data was submitted to the Normality and Homogeneity tests. In vitro Indirect Cytotoxicity assay data was statistically analyzed by ANOVA two-way, followed by Tukey’s test (α = 0.05). Compressive strength and contact angle data were statistically analyzed by one-way ANOVA, followed by Tukey’s test (α = 0.05). XRD showed the presence of Hydroxyapatite (HA) peaks in the structures CXHA, CXHAGO 0.5%,1.0% and 1.5%. FT-IR showed amino and carboxylic bands characteristic of CX. Raman spectroscopy analysis evidenced a high quality of the GO. In the TGA it was observed the mass loss associated with the CX degradation by depolymerization. SEM analysis showed pores in the scaffolds, in addition to HA incorporated and adhered to the polymer. Contact angle test showed that scaffolds have a hydrophilic characteristic, with the CX group the highest contact angle and CXHA the lowest ( p < 0.05). 1.0 wt% GO significantly increased the compressive strength compared to other compositions. In the bioactivity test, the apatite crystals precipitation on the scaffold surface was observed. MTT test showed high cell viability in CXHAGO 1.0% and CXHAGO 1.5% scaffold. CXHAGO scaffolds are promising for regenerative dentistry application because they have morphological characteristics, mechanical and biological properties favorable for the regeneration process.
This study analyzed a recently developed bone substitute biomaterial made of chitosan-xanthan- hydroxyapatite-graphene oxide (CXHAG). The CXHAG particles underwent in vitro structural and morphological characterization, and in vivo testing with or without osteogenic conditioned medium from mesenchymal stem cells. Aim: The aim of this study was to determine whether the CXHAG novel biomaterial, supplemented with conditioned medium from mesenchymal stem cells, could be useful for bone regeneration. Materials and Method: For the in vitro study, cells were incubated with 20mg of CXHAG granules for 24 hours and a MTT assay was performed to tests for cytotoxicity. For the in vivo study, critical size calvarial bone defects were created in twenty-five rats. One animal had the defect unfilled (Control Group–CG) and was euthanized after 42 days. Twelve rats received the CXHAG particles (Group 1–G1) and the other twelve received the CXHAG particles supplemented with the conditioned medium (Group 2–G2). All G1/G2 grafts were covered with a CXHAG membrane. G1/G2 animals were euthanized after 14 days (T1) or 42 days (T2). The specimens were processed and histologically evaluated. Results: SEM analysis of the CXHAG particles showed granules of 300-400μm, with a rough irregular surface. They were not cytotoxic to dental pulp stem cells in vitro. The CG specimen showed loose immature connective tissue and no bone formation at the center of the defect. G1 and G2 presented remnant biomaterial particles at both time points, but only G2 had bone formation at the center of the defect. Conclusions: The conditioned medium had a positive effect on bone regeneration in rat calvarial critical size defects when associated with the novel bone substitute biomaterial.