This paper presents a double-pass low-noise bismuth-doped fiber amplifier based on a Sagnac comb filter. The amplifier utilizes a Sagnac loop to filter out spontaneous emission light outside the signal wavelength, effectively decreasing the noise figure. Experimental results show that the amplifier achieves a minimum noise figure of only around 3.7 dB. Moreover, its gain bandwidth can cover a significant portion of the O-band. Under a forward pump power of 0.538 W, with an input signal power of -30 dBm, the amplifier can reach a gain of 29.6 dB, while the noise figure is only approximately 4 dB. Under backward pump, the gain difference for different input signal powers is larger compared to forward pump. We also studied the variation of gain with input signal power at a pump power of 0.5 W, using both forward and backward pump methods. The results indicate that the pump direction has a minor impact on the gain but significantly affects the noise figure, with the noise figure under forward pump being 1-2 dB lower than that under backward pump. Additionally, the amplifier exhibits a maximum saturation output power of approximately 9.5 dBm. In conclusion, this amplifier has great potential for application in WDM communication systems.