15 December 2011 in Journal of Applied Physics
The magnetoelectric effects in piezoelectric-disk/magnetostrictive-ring (PE-disk/MS-ring) structure at electromechanical resonance (EMR), where the magnetostrictive and piezoelectric phase are coupled through normal stresses, are modeled. The predicted resonance frequency and the frequency dependence of the magnetoelectric (ME) voltage coefficient are in good agreement with the data for the PZT (Pb(Zr0.52Ti0.48)O3) –disk/CFO(CoFe2O4) -ring. The improved interfacial mechanical coupling through normal stresses is responsible for the enhanced magnetoelectric properties of the disk-ring structure. It is suggested that proper frequency and stronger ME effect in the disk-ring structure can be obtained by optimizing the structure. The ME effect in the disk-ring structure shows promising application in transducers for magnetoelectric energy conversion.
1 October 2021 in Sensors and Actuators A: Physical
1 November 2022 in AIP Advances
In this work, an improved circuit model is presented for the single split ring resonator (SRR), taking into account non-uniform distribution of conduction current and surface charges. To determine the circuit elements of the SRR, the electron kinetic, electric, and magnetic energy have been derived theoretically. Moreover, in addition to gap and surface capacitances, coupling capacitance is introduced to characterize the electric coupling effect between them. A formula for the fundamental resonance wavelength has been obtained, which shows good agreement with numerical simulations in both optical and microwave frequency ranges. The model will be instructive for engineering resonant properties of the SRRs and provide valuable insight into other complex plasmonic structures.
9 January 2024 in Journal of Lightwave Technology
Active control of metasurfaces can be achieved using the magnetic effect, which is, however, quite weak. Here, a different method for realizing the magnetic tuning is proposed. For this purpose, a simple two-dimensional array of split-ring resonators (SRRs), consisting of ultrathin flexible metals bonded with Mn-Zn ferrite patches, has been designed. With the external magnetic field, a magnetic force will be exerted on the ferrite patches, leading to the deformation of the meta-atoms (i.e., the flexible SRRs). Consequently, the gap size of the SRRs can be altered continuously by varying the magnetic field, which modifies the electromagnetic properties of the metasurface. The active tuning of resonance frequency and transmission efficiency has been demonstrated with theory and experiments in the microwave band. The result may be useful for constructing magnetically- controllable switches and modulators as well as the magnetic sensors operating in the microwave or THz regime.
1 December 2019 in AIP Advances
A piezoelectric/ferromagnetic bicantilever composite, constructed with a Pb(Zr,Ti)O3 beam fixed at the middle point and NdFeB magnets attached at both free ends, has been designed and exhibited a giant magnetoelectric torque (MET) effect. The low-frequency and resonant MET effect in the bicantilever composite is more than twice as much as that in the single cantilever composite with the same components and geometry dimension. As the magnet mass increases, the MET effect first increases nearly linearly and then tends to saturate while the resonant frequency decreases. When the magnets are attached asymmetrically at the tip, the MET effect is stronger than that of the symmetric attachment. Our results will give more choices for preparing the magnetoelectric device used as an ac magnetic field sensor, energy harvester, etc.
8 June 2022 in Optics Express
A transparent absorber refers to the device which can absorb light strongly within a narrow frequency range but transmit light efficiently outside that range. Because of the contradiction between absorption and transmission, however, the performances of the transparent absorbers are usually compromised. In this work, we propose a transparent absorber based on a sandwiched metal-insulator-metal (MIM) structure, i.e., two perforated ultrathin metal films separated by a central dielectric layer. This structure has the advantage that the narrow-band absorption can be greatly enhanced because of the cooperation of surface-plasmon polariton (SPP) mode and multiple reflections in the dielectric cavity. Moreover, the ultrathin thickness of the stacked metal films enables high transmission when the wavelength of incident light deviates from the SPP resonance. A semi-analytical Fabry-Perot model has been employed to describe the optical properties, which agrees well with the simulation. The dependence of optical properties on the structural parameters has also been studied systematically. In addition, by covering the transparent absorber with an antireflection layer, highly efficient absorption of red (∼87% @ 629 nm), green (∼89% @ 524 nm), or blue (∼68% @ 472 nm) light and high transmission (∼80%) in the transparent region have been suggested. With its excellent visible-wavelength selective absorption, polarization independence, high angle-tolerance, and structural simplicity, the proposed MIM transparent absorber may have potential applications in the display technology and other smart scenarios.