3 February 2022 in IEEE Communications Surveys & Tutorials
The industrial environment poses strict requirements to the infrastructure of good and service production and delivery. Communications are not an exception. Wired systems currently dominate in factory premises for their robustness in complex and noisy propagation conditions. They also present ruggedness in front of malicious attackers aiming to bring the communication system down or take over the system under control. Unfortunately, wired systems have severe maintenance, scalability, and operational flexibility limitations. Wireless systems constitute a solution, but they show performance weaknesses in reliability and security. This paper analyzes the security challenges of radio-frequency wireless systems in industrial use cases and aligns different categorization efforts from various sources, focusing on the lower layers of the OSI model (PHY/MAC). The analysis includes a detailed taxonomy of attacks and PHY/MAC countermeasure techniques required to make security compatible with the system requirements of industrial applications. Among the different industrial applications, the focus of this work is directed towards Factory Automation. Finally, based on the wide range of existing attacks and techniques, we propose a methodology for dissecting attack scenarios and designing tailored protection techniques and architectures. A wide diversity of attack situations are described, and the corresponding countermeasures are discussed. Finally, we propose a methodology for dissecting attack scenarios and designing tailored protection techniques and architectures.
15 December 2021 in IEEE Open Journal of the Industrial Electronics Society
Many emerging applications require a higher level of flexibility, modularity, and efficiency but are dependent on advancements in communication infrastructure and distributed computing. Time-sensitive networking (TSN) standards aim at providing vendor agnostic, reliable, and deterministic communications over the Ethernet, but lack in flexibility and modularity provisions. In this context wireless communication systems are preferred given the obvious benefits in terms of increased flexibility, reduced deployment & maintenance costs, and inherent mobility support. However, the stochastic nature of the wireless medium poses several challenges in achieving these benefits. In this paper we comprehensively analyze the recent standardization efforts and developments in IEEE 802.11 and 5G to enable low-latency, deterministic communications and present the current status of their integration with wired TSN. Then, we present a set of use cases that may be enabled by wireless TSN including industrial automation, automotive, or audiovisual applications.
27 August 2021 in IEEE Transactions on Industrial Informatics
Industrial control systems present numerous challenges from the communication systems perspective: clock synchronization, deterministic behavior, low latency, high reliability, flexibility, and scalability. These challenges are mostly solved with standard technologies over Ethernet, e.g., time-sensitive networking (TSN). As a research trend, it is expected that TSN will converge with wireless, leading to the Wireless TSN paradigm. Also, Wireless TSN is expected to be integrated with Ethernet TSN to create large-scale wired–wireless (Hybrid) TSN networks. The first step toward Hybrid TSN is the distribution of the clock reference from the wired to the wireless domain. In this article, we leverage existing Ethernet TSN and wireless technologies implementations (Wi-Fi and w-SHARP) and present two hardware architectures specifically engineered to enable the clock synchronization distribution among the network domains. The hardware architectures have been implemented over a system-on-chip field-programmable gate array platform. We demonstrate through several experiments that the implementation is able to fulfill the synchronization performance required by TSN.
7 July 2020 in IEEE Transactions on Industrial Informatics
Real-time industrial applications in the scope of the industry 4.0. present significant challenges from the communication perspective: low latency, ultra-reliability, and determinism. Given that wireless networks provide a significant cost reduction, lower deployment time, and free movement of the wireless nodes, wireless solutions have attracted the industry attention. However, industrial networks are mostly built by wired means because state-of-the-art wireless networks cannot cope with the industrial applications requirements. In this paper, we present the hardware implementation of wireless SHARP (w-SHARP), a promising wireless technology for real-time industrial applications. w-SHARP follows the principles of Time-Sensitive Networking and provides time synchronization, time-aware scheduling with bounded latency, and high reliability. The implementation has been carried out on a Field Programmable Gate Array-based Software Defined Radio platform. We demonstrate, through a hardware testbed, that w-SHARP is able to provide ultra-low control cycles, low latency, and high reliability. This implementation may open new perspectives in the implementation of high-performance industrial wireless networks, as both PHY and MAC layers are now subject to be optimized for specific industrial applications.
1 December 2021 in IEEE Transactions on Industrial Informatics
Standard wireless systems are rapidly evolving to support the strict requirements of industrial applications. In this research line, wireless time-sensitive networking (TSN) is gaining momentum, thanks to the interest of wired TSN among the industries. A critical aspect of the wireless TSN research is the integration of wired and wireless TSN to create large-scale hybrid TSN networks. This integration is currently being discussed for 5G, whereas the integration between wired TSN and IEEE 802.11 is a step behind. To address this gap in the state of the art, this article discusses the integration challenges of wired TSN and wireless local area network technologies and proposes a hybrid TSN device architecture. Based on the architecture, we have developed a hybrid TSN network proof-of-concept. The proof-of-concept demonstrates that the hybrid TSN architecture can maintain the essential TSN services, including providing guaranteed latency in the 100-microsecond level.
9 January 2020 in IEEE Transactions on Industrial Informatics
The time-sensitive network paradigm envisions the integration of operation technology and information technology in the same network. One of the requirements for building time-sensitive networks is sharing a global time along the network. This requirement is especially critical in wireless systems, where there are few robust methods to perform accurate time transfer. In this article, the problem of time transfer over realistic wireless channels is studied, and a time distribution scheme is proposed. The time distribution scheme has three components: Precision time protocol, a novel timestamping method (enhanced timestamps) and an algorithm to implement the enhanced timestamps. The performance of the proposed scheme has been evaluated in MATLAB using the IEEE 802.11n Standard under several standard wireless local area network channel models. The results show that the system can reach subnanosecond time transfer accuracy under non-line-of-sight and time-variant conditions, but its performance greatly depends on the signal-to-noise ratio and on the channel variation rate.