1 June 2022 in Materials Research Express
Natural fiber-reinforced polymer composites have several advantages over traditional composites. The chemical modification of natural fibers helps to develop polymer composites with better mechanical properties. In the present work, mechanical properties such as tensile, flexural, and impact strength of chopped Screw pine fiber reinforced vinyl ester composites have been evaluated under-treated conditions based on the volume fractions of Screw pine fibers. The fibers have been treated with 5% of NaOH solution for 1 h at room temperature. The hand lay-up method has been used to prepare composite plates at room temperature. The results revealed that mechanical properties of composites increased with the increase of the fiber content up to 35.57 vol% at both the untreated and treated conditions and then dropped. However, the modulus values have been increased continuously from the fiber content of 8.43 to 45.3 vol%. It was identified that the critical or optimum fiber content for better mechanical properties is 35.57 vol% for both the untreated and treated conditions. The percentage of improvement at every combination was obtained by comparing the composites prepared with the untreated and treated fibers. The fractured surface of the treated fiber composites was examined by scanning electron microscopy. Moreover, the tensile properties are predicted using the Hirsch and Modified Bowyer and Bader model and compared with experimental values. The predicted results revealed that the Modified Bowyer and Bader model shows better conformity.
18 November 2022 in Materials Letters
1 January 2024 in AIMS Materials Science
VSVenkatarajan Subbarayalu
JCJayaseelan Chinnapalanisamy
Jayaseelan Chinnapalanisamy
The screw pine and E-glass fibers were hybridized in the vinyl ester resin matrix to prepare the hybrid composite laminates in the present communication. Hybrid composite laminates at the constant volume fraction of 35.12% has been fabricated using the hot press compression molding in two forms, namely dispersed and skin-core, to evaluate the mechanical properties. Mechanical properties of composite laminates were studied based on the various volume fraction of glass fiber content (0, 3.32, 8.15, 12.44 and 16.53 vol.%). The scanning electron microscopy (HITACHI S-3000N) was used to study the fracture surface of composite laminates. The results of hybrid composite laminates were compared with a neat resin sample and screw pine fiber (35.12 vol.%) alone composite. The results revealed that the mechanical properties of both the type of composite laminates increased as glass fiber addition was increased. The SPF18.59/GF16.53 hybrid composite laminate exhibits the highest level of mechanical properties because of the concentration and higher elongation percentage of glass fibers. Moreover, the skin-core type composites perform better than those of the dispersed type hybrid composites. Because of the stretching nature of screw pine fibers, they elongate when the load is transferred from glass fibers to screw pine fibers, resulting in an increase in mechanical properties. The property values were predicted using a theoretical model, and it was found that the two were in good agreement.
10 January 2025 in Materials Science
RSRajamuneeswaran Subbaiyaraja
Rajamuneeswaran Subbaiyaraja
This study examines how water exposure affects the mechanical properties of randomly oriented screw pine fiber reinforced vinyl ester composites. Composite specimens have been produced using the compression moulding process with three different fibre content values (12.75, 26.19, and 40.39 vol.%). For 5 days, the produced composite specimens were immersed in three different water environments: seawater, groundwater, and distilled water, to investigate the effect of water absorption on the mechanical properties of composites. The mechanical properties of composites under wet conditions were compared to those in dry conditions, and they were found to decrease when water particles were absorbed. In both dry and wet conditions, the composite with a volume of 26.19 % has the highest tensile, flexural, and impact strength values. Mechanical properties were drastically lowered in wet conditions compared to dry conditions. It was revealed that exposure to seawater has a significant effect on composite properties when compared to ground and distilled water exposure. The fractured surface of composite specimens was examined under a scanning electron microscope following exposure to three different water conditions. Scanning electron microscopy revealed resin losses, void formation, and microcracks on the surface of the wet composite specimens.