24 December 2018 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
To save energy and reduce environmental impacts, new technologies towards a development of a sustainable ‘greener’ economy are needed. The main opportunity to improve sustainability by reducing emissions is within the transport sector. More than 90% of all goods worldwide are transported by ships. Particularly maritime ships using heavy fuel oil and marine gas oil play a major role. The total fuel consumption of shipping in 2016 was about 250 m t (domestic ca. 50 m t, international shipping ca. 200 m t). The vast portion of the energy consumption of a ship is the need to overcome the drag between ship hull and water—depending on the shape of the vessel and its size up to 90% of total fuel consumption. This means reducing drag helps to save fuel and reduces carbon emissions as well as pollution considerably. Different techniques for drag reduction are known, e.g. the micro-bubble technique or the bulbous bow. We investigated a novel bioinspired technique since 2002: the application of biomimetic surfaces with long-term stable air layers on ship hulls, serving as a slip agent. This technology is based on the Salvinia Effect, allowing a permanent stabilization of air layers under water. In this case study, we analysed the possible savings, which also could be combined with modified micro-bubble technologies. We calculated, based on a selection of five ship types, representing 75% of the world fleet, that air-layer hull coatings could lead to estimated savings of 32.5 million tons of fuel (meaning 13.0% of the worldwide shipping fuel consumption), equal to 18.5 billion US$ and 130.0 million tons of CO 2e per year. The positive impacts on global temperature and other greenhouse gases are calculated and could be a contributing factor in accomplishing the UN Sustainable Development Goals and the Paris Agreement to the UN Framework Convention on Climate Change. The study is a contribution to enhance our patchy knowledge concerning the potential economic and ecological benefit of bionics and biomimetic technologies. This article is part of the theme issue ‘Bioinspired materials and surfaces for green science and technology’.
3 February 2020 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Superhydrophobicity is a physical feature of surfaces occurring in many organisms and has been applied (e.g. lotus effect) in bionic technical applications. Some aquatic species are able to maintain persistent air layers under water ( Salvinia effect) and thus become increasingly interesting for drag reduction and other ‘bioinspired’ applications. However, another feature of superhydrophobic surfaces, i.e. the adsorption (not absorption) and subsequent superficial transportation and desorption capability for oil, has been neglected. Intense research is currently being carried out on oil-absorbing bulk materials like sponges, focusing on oleophilic surfaces and meshes to build membranes for oil–water separation. This requires an active pumping of oil–water mixtures onto or through the surface. Here, we present a novel passive, self-driven technology to remove oil from water surfaces. The oil is adsorbed onto a superhydrophobic material (e.g. textiles) and transported on its surface. Vertical and horizontal transportation is possible above or below the oil-contaminated water surface. The transfer in a bioinspired novel bionic oil adsorber is described. The oil is transported into a container and thus removed from the surface. Prototypes have proven to be an efficient and environmentally friendly technology to clean oil spills from water without chemicals or external energy supply. This article is part of the theme issue ‘Bioinspired materials and surfaces for green science and technology (part 3)’.
14 December 2018 in Beilstein Journal of Nanotechnology
In technical systems, static pressure and pressure changes are usually measured with piezoelectric materials or solid membranes. In this paper, we suggest a new biomimetic principle based on thin air layers that can be used to measure underwater pressure changes. Submerged backswimmers (Notonecta sp.) are well known for their ability to retain air layers on the surface of their forewings (hemelytra). While analyzing the hemelytra of Notonecta, we found that the air layer on the hemelytra, in combination with various types of mechanosensitive hairs (clubs and pins), most likely serve a sensory function. We suggest that this predatory aquatic insect can detect pressure changes and water movements by sensing volume changes of the air layer under water. In the present study, we used a variety of microscopy techniques to investigate the fine structure of the hemelytra. Furthermore, we provide a biomimetic proof of principle to validate our hypothesis. The suggested sensory principle has never been documented before and is not only of interest for sensory biologists but can also be used for the development of highly sensitive underwater acoustic or seismographic sensory systems.
13 February 2019 in Beilstein Journal of Nanotechnology
Angiosperms and their pollinators are adapted in a close co-evolution. For both the plants and pollinators, the functioning of the visual signaling system is highly relevant for survival. As the frequency range of visual perception in many insects extends into the ultraviolet (UV) region, UV-patterns of plants play an important role in the flower–pollinator interaction. It is well known that many flowers contain UV-absorbing pigments in their petal cells, which are localized in vacuoles. However, the contribution of the petal surface microarchitecture to UV-reflection remains uncertain. The correlation between the surface structure and its reflective properties is also relevant for biomimetic applications, for example, in the field of photovoltaics. Based on previous work, we selected three model species with distinct UV-patterns to explore the possible contribution of the surface architecture to the UV-signaling. Using a replication technique, we transferred the petal surface structure onto a transparent polymer. Upon illumination with UV-light, we observed structural-based patterns in the replicas that were surprisingly comparable to those of the original petals. For the first time, this experiment has shown that the parameters of the surface structure lead to an enhancement in the amount of absorbed UV-radiation. Spectrophotometric measurements revealed up to 50% less reflection in the UV-absorbing regions than in the UV-reflecting areas. A comparative characterization of the micromorphology of the UV-reflecting and UV-absorbing areas showed that, in principle, a hierarchical surface structure results in more absorption. Therefore, the results of our experiments demonstrate the structural-based amplification of UV-reflection and provide a starting point for the design of bioinspired antireflective and respectively strongly absorbing surfaces.
10 June 2019 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Extreme water repellent ‘superhydrophobic’ surfaces evolved in plants and animals about 450 Ma: a combination of hydrophobic chemistry and hierarchical structuring causes contact angles of greater than 150°. Technical biomimetic applications and technologies for water repellency, self-cleaning (Lotus Effect) and drag reduction (Salvinia Effect) have become increasingly important in the last two decades. Drag reduction (e.g. for ship hulls) requires the presence of a rather thick and persistent air layer under water. All existing technical solutions are based on fragile elastic hairs, micro-pillars or other solitary structures, preferably with undercuts (Salvinia Effect). We propose and provide experimental data for a novel alternative technology to trap persistent air layers by superhydrophobic grids or meshes superimposed to the solid surface: AirGrids. AirGrids provide a simple and stable solution to generate air trapping surfaces for drag reduction under water as demonstrated by first prototypes. Different architectural solutions, including possible recovery techniques for the air layer under hydrodynamic conditions, are discussed. The most promising target backed by first results is the combination of Air Retaining Grids with the existing microbubble technology. This article is part of the theme issue ‘Bioinspired materials and surfaces for green science and technology (part 2)’.
22 February 2023 in Journal of Materials Processing Technology