5 April 2018 in IEEE Transactions on Electron Devices
In negative capacitance field-effecttransistors (NCFETs), drain current may decrease with increasing Vds in the saturation region, leading to negative differential resistance (NDR). While NDR is useful for oscillator design, it is undesirable for most analog circuits. On the other hand, the tendency toward NDR may be used to reduce the normally positive output conductance (g ds) of a shortchannel transistor to a nearly zero positive value to achieve higher voltage gain. In this paper, we analyze the NDR effect for NCFET in the static limit and demonstrate that it can be engineered to reduce gds degradation in shortchannel devices. Small and positive gds is achieved without compromising the subthreshold gain, which is crucial for analog applications. The 7-nm ITRS 2.0 FinFET with 0.7 V Vdd is used as the baseline device in this paper.
21 June 2018 in IEEE Electron Device Letters
Negative Capacitance Field Effect Transistors (NCFET) boost the electric field at the semiconductor-channel interface by virtue of the gate voltage amplification effect of a ferroelectric (fe) layer. NCFETs should be designed in such a way that this elevated field does not exceed the maximum electric field (Emax) determined by the reliability limit of the interfacial (IL) dielectric or NBTI/PBTI reliability. In this work, a compact model based methodology is presented to determine the NCFET design space considering several variables of the fe-layer and the baseline transistor including the fe-layer thickness (Tfe), coercive field (Ec), remnant polarization (Pr), baseline transistor equivalent oxide thickness (EOT), supply voltage (Vdd), threshold voltage (Vth) and Emax. Using this methodology, NC-FDSOI transistor is designed in TCAD, and the result shows that even without raising the maximum interface field as compared to the baseline transistor, NCFET achieves much better Ion/Ioff ratio and sub-threshold swing while operating at lower Vdd.
1 October 2018 in IEEE Transactions on Electron Devices
We propose a new scheme to consider the dielectric (DE) phases inside polycrystalline ferroelectric (FE) materials. The scheme is used to extract material parameters from experimental polarization-electric field (P-E) measurements from the literature. A Sentaurus TCAD structure is constructed with the extracted parameters, and the simulated P-E curve is in a good agreement with the experimental data. Furthermore, variation of the device performance in a negative capacitance field-effect transistor (NCFET) due to the spatial distribution of DE and FE phases is studied using Sentaurus TCAD. It is found that the resultant variations of on and off currents can be up to 14.44% and 30.23%, respectively, thus showing the impact of inhomogeneous crystalline phases of the FE material on device performance.
26 August 2019 in IEEE Transactions on Electron Devices
A BSIM-based compact model for a high-voltage MOSFET is presented. The model uses the BSIM-BULK (formerly BSIM6) model at its core, which has been extended to include the overlap capacitance due to the drift region as well as quasi-saturation effect. The model is symmetric and continuous, is validated with the TCAD simulations and experimental 35- and 90-V LDMOS and 40-V VDMOS transistors, and shows excellent agreement.
23 January 2018 in IEEE Transactions on Electron Devices
Negative capacitance field effect transistor (NCFET) is designed in 5-nm FinFET node, which simultaneously meets the low-power and high-performance targets of ION and IOFF at Vdd = 0.5 V and Vdd = 0.23 V, respectively, while the international roadmap for devices and systems (ITRS 2.0) projected Vdd is 0.65 V for both. The impact of power supply and parasitic capacitance on the performance of NCFET is studied. It is demonstrated that NCFET can be designed for fluid subthreshold swing (SS) behavior such that SS is degraded around Vgs = 0, Vds = Vdd, and is improved in the subthreshold region. This helps in combating OFF-current variation due to the threshold voltage fluctuations. A compact model to determine such design conditions is presented. Parasitic capacitance and the ferroelectric material parameters should be cooptimized for the target Vdd.
20 March 2015 in IEEE Journal of the Electron Devices Society
In this paper, an analytical model of threshold voltage for bulk MOSFET is developed. The model is derived from the physical charge-based core of BSIM6 MOSFET model, taking into account short channel effects, and is intended to be used in commercial SPICE simulators for operating point information. The model is validated with measurement data from IBM 90-nm technology node using various popular threshold voltage extraction techniques, and good agreement is obtained.