Being stabilized in a docile glow discharge phase, liquid-electrode discharge (LED) at atmospheric pressure is one of the popular plasma sources. Extremely fascinating in LED is the appearance of various self-organized patterns at the surface of the liquid when it is at anode potential. However, the fascinating spiral patterns have to date not been reported in the literature about LED. In this paper, the spiral patterns with various arm numbers are observed in LED excited by a sinusoidal voltage. The results indicate that the arm number of the spirals decreases with time, and multi-arm spirals evolve to a single-arm spiral at last. During this evolution, the current waveform keeps a constant profile, which starts with a short pulse and is followed by a long hump. In addition, the intensity of the pulse increases, while that of the hump keeps almost constant as time elapses. Fast photography reveals that the single-arm spiral forms in the hump discharge phase and develops on a timescale of several microseconds. To shed light on the formation mechanism of the self-organized spirals, the spiral patterns are simulated based on the reaction diffusion model, which reveals that the evolution of the spiral patterns results from the variation in ion strength of the liquid electrode. Finally, from optical emission spectroscopy, plasma parameters including electron density, electron temperature, vibrational temperature, and gas temperature are investigated for the spiral patterns, all of which show a growing trend during the evolution from the multi-arm spiral to the single-arm one. The obtained results are of great significance for the pattern formation dynamics of self-organized spirals in different systems.
Atmospheric pressure plasma jet opens up extensive potential applications and becomes a hot issue in low temperature plasma research in which a guided streamer regime is normally involved. The dynamics of the streamer head (also referred to as a plasma bullet) are crucial to the distribution of active species. Previous studies have revealed that the guided streamer operates either in a single bullet (SB) mode or in a double bullet mode. In this paper, we report the streamer splits phenomenon in an argon plasma jet excited with a pulse voltage. Results indicate that the split of the plasma bullet only appears with a high voltage amplitude (Va), otherwise, the streamer always keeps in the SB mode. With increasing Va, the distance that the SB travels (ds) increases. With the addition of trace oxygen in the working gas, ds is reduced. However, the influence on ds with the addition of trace nitrogen can be ignored. Only when the flow rate of added nitrogen is high, ds is also reduced. Moreover, the intensities increase with increasing voltage amplitude, while the durations reduce for the discharges at the rising and falling edges of applied voltage. In addition, the spatial distributions of streamer velocity and plasma parameters are compared for the plasma jet with different Va. The split of the plasma bullet is attributed to the Penning ionization in the interfacial layer between the working argon stream and the ambient air.