20 February 2015 in IEEE Transactions on Antennas and Propagation
Due to simplicity, hybridization of geometrical optics (GO) and physical optics (PO) based on ray tracing has been widely used for fast scattering analyses. However, when targets of curved concavities are discretized by flat facets, the loss of divergence factor (DF) will degrade the simulation accuracy. To remedy this loss, a simple and efficient factor, entitled virtual divergence factor (VDF), is proposed to play the role of DF. To prove the validity of VDF and simulate the scattering of concave complex targets, a hybrid method of GO/PO and physical theory of diffraction (PTD) is elucidated. With VDF correction, several typical targets, including a S-shape cavity, are simulated by this hybrid method. In comparison to multilevel fast multipole algorithm (MLFMA) or measurements, the validaty of VDF is fully demonstrated by good agreements and the excellent performance relative to DF on canonical surfaces, where the great efficiency and flexibility of this hybrid method are also shown. Moreover, one interesting and important issue, the dependance of field convergence on the maximum number of ray reflections, is also investigated for the first time.
2 July 2019 in IEEE Transactions on Antennas and Propagation
A nonconformal twofold domain decomposition method (TDDM) based on the hybrid finite element method-boundary element method (FEM-BEM) is proposed for analyzing three-dimensional (3D) multiscale composite structures. The proposed TDDM starts by partitioning the composite object into a closed exterior boundary domain and an interior volume domain. The interior and the exterior boundary value problems are coupled to each other through the Robin transmission conditions (RTCs). Both domains are then independently decomposed into sub-regions to facilitate computation. Specifically, FEM-DDM with the second order transmission conditions (SOTCs) is employed for the interior domain, and BEM-discontinuous Galerkin (BEM-DG) based on the combined field integral equation (CFIE) is applied for the exterior boundary domain. The proposed TDDM allows for nonconformal discretization between any touching sub-domains. Without the introduction of a stabilization term that relies on a line integral over intersection of non-matching meshes and relevant terms involving surface-line integrals, the proposed TDDM provides an effective domain decomposition preconditioner for the global system. Numerical examples are presented, and the comparisons of the simulation results with FEM-BEM confirms the validity and accuracy of TDDM. Moreover, its ability to model practical large-scale and multiscale targets is also demonstrated.
25 October 2016 in IEEE Transactions on Antennas and Propagation
This paper presents a novel Galerkin-type method of moments solution of the volume surface integral equation (VSIE), which is developed for the analysis of electromagnetic scattering and radiation from composite metallic and dielectric structures. Our new scheme utilizes curved tetrahedral elements and curved triangular patches for geometric modeling, and the associated higher order hierarchical vector (HOHV) basis functions for volume/surface current modeling. In contrast to the previous studies on higher order VSIE, our scheme, which is reported for the first time in VSIE, is much more flexible. In comparison with the conventional low-order scheme, our scheme requires much less memory and computational time for the same accuracy level. Numerical results are provided to demonstrate the accuracy, efficiency, and flexibility of our scheme.
13 February 2017 in IEEE Geoscience and Remote Sensing Letters
A set of compact and stable formulations is presented to calculate the response of logging tools employing tilted-coil antennas in anisotropic concentrically cylindrical multilayered formation. The presented formulations can be used to investigate the effect of mandrel, borehole, and invasion. Our formulations are different from previous ones in three aspects. First, the tool mandrel can be cylindrically multilayered, and electrical parameters of each layer are arbitrary. That is to say, the mandrel is not limited to being perfectly metallic. Second, the formation can be either anisotropic or isotropic. Finally, the propagation of electromagnetic wave in an inhomogeneous cylindrical medium is described by the generalized reflection and transmission coefficients without the numerical overflow issue. Numerical results in comparison with those from other approaches have demonstrated the validity and stability of our new formulations.
1 April 2019 in Computer Methods in Applied Mechanics and Engineering
16 February 2017 in IEEE Transactions on Antennas and Propagation
In this paper, we present a set of novel and stable formulations to calculate the response of logging tools with horizontal-coil antennas in an eccentric borehole straddling cylindrically multilayered formations. It can be applied in fast forward computation and the inverse problem for electromagnetic (EM) well-logging in deviated and horizontal wells, where eccentric scenarios are often encountered. Our formulations are different from previous ones in following aspects. First, the tool mandrel can be cylindrically multilayered and the electrical parameters of each layer are arbitrary. Namely, it is not limited to being perfectly metallic. Second, the EM propagation in inhomogeneous medium is considered by the generalized reflection and transmission method, in place of the transfer matrices. The associated generalized reflection and transmission coefficients are expressed by the ratios of Bessel or Hankel functions that obviate the notorious overflow problem for numerical computation. Finally, a set of linear matrix functions are constructed to solve for the EM waves in a borehole based on the concept of the generalized reflection, rather than that of the fictitious boundary. Numerical results in comparison with those from other approaches have demonstrated the validity and stability of our new formulations.