9 April 2021 in IEEE Transactions on Vehicular Technology
For a Multiple-Input Multiple-Output (MIMO)-Orthogonal Frequency-Division Multiplexing (OFDM) based dual-function radar and communication (DFRC), the problem of transmit/receive beamforming with the constraints of Quality of Server (QoS) and transmit power is studied in this paper. The degrees of freedom for system design are the transmit/receive beampatterns at the radar array, and the receive beampattern at the communication array. Firstly, we adopt Kullback-Leibler divergence (KLD) as design metrics and formulate the design problem as a KLD maximization problem with QoS and transmit power constraints. Secondly, we solve the original non-convex problem through the proposed alternating direction sequential relaxation programming (ADSRP) algorithm, which iteratively optimizes three subproblems: 1) dual-function transmit beamforming with the constraints of QoS and transmit power; 2) radar receive beamforming; and 3) communication receive beamforming. We analytical provide the monotonic improvement and bound of KLD, which guarantees the convergence of the ADSRP algorithm. Finally, simulation results are provided to evaluate the effects of different QoS requirements and peak-to-average-power ratio (PAPR) constraints in terms of power allocation scheme and radar detection performance, compared to the traditional radar system (TRS).
22 October 2020 in IEEE Sensors Letters
This letter investigates the problem of power distribution along with the word error probability (WEP) constraint for the orthogonal frequency division multiplexing based (OFDM) dual-function radar and communication sensor. First, we optimize the radar signal-to-noise ratio (SNR) with the constraints of the WEP requirement and total transmit power. Second, we propose an alternating direction sequential relaxation programming algorithm that involves solving a sequence of approximation convex version of the original nonconvex problem. Finally, simulation results are provided to evaluate the effect of different WEP requirements on the radar SNR, and a significant gain in the radar SNR can be achieved, compared to the average power allocation case.
10 June 2020 in IEEE Access
Instead of only considering the radar estimation error in the traditional radar system (TRS), for the integrated radar and communication system (IRCS), we investigate the Cramer-Rao bound (CRB) of the localization estimation, which is influenced by both radar estimation error and communication transmission error. The functions of radar and communication are operated simultaneously by embedding the communication symbols into the multicarrier radar waveforms. Firstly, we derive the CRB of time/direction of arrival (TOA/DOA) estimation. To minimize the estimation error, we maximize the signal-to-interference-plus-noise ratio (SINR) of radar by iteratively optimizing the radar transmit and receive beamformers (with the constraint of available transmit power). Then, the CRB of localization estimation is derived using hybrid TOA/DOA measurement. The local CRBs from different IRCSs are fused according to the linear fusion rule at the fusion center (FC). Finally, numerical results demonstrate that the additional estimation errors for the IRCS are mainly determined by the channel conditions of communication and available transmit power; the estimation accuracy for both IRCS and TRS can be improved through the iterative transmit and receive beamforming (ITRB) technique.